# Box template > How big a box do you want to fold? Print a folding box for any size in millimetres: tuck-end or lid, glue flaps and fold lines, with a 3D fold preview. Make a printable box template for any inner size in millimetres: tuck-end or lid style, glue flaps, fold lines and card thickness, with a 3D fold preview. - Page: https://how.box/box-template/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/box-template/?l={l}&w={w}&h={h}&s={s}&t={t}&d={d}&f={f}&lg={lg}&p={p}&o={o} - `l` (number 10 to 300): Inner length in millimetres. Example: `80`. - `w` (number 10 to 300): Inner width in millimetres. Example: `50`. - `h` (number 10 to 300): Inner height in millimetres. Example: `100`. - `s` (tuck or lid): Style: tuck or lid. Example: `lid`. - `t` (number 0.1 to 3): Card thickness in millimetres. Example: `0.5`. - `d` (number 5 to 100): Lid wall height in millimetres (lid style only). Example: `25`. - `f` (whole number 0 to 100): How far the 3D preview is folded, in percent. Example: `50`. - `lg` (text): Caption printed at the bottom of every sheet. Example: `Cut the bold lines`. - `p` (a4 or letter): Paper: a4 or letter. Example: `a4`. - `o` (portrait or landscape): Portrait or landscape. Example: `landscape`. Example answer: https://how.box/box-template/?l=80&w=50&h=100&s=lid&t=0.5&d=25&f=50&lg=Cut+the+bold+lines&p=a4&o=landscape The page computes the answer in the browser: read results from the agent tools below, not from the page HTML. ## Agent tools - `box_template_plan`: Plan a printable box template for an inner size in millimetres (10–300 each) and show it on the page. - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"box_template_plan","arguments":{"length_mm":80,"width_mm":50,"height_mm":100,"style":"lid","thickness_mm":0.5,"lid_depth_mm":25,"fold":50,"legend":"Cut the bold lines","paper":"a4","orientation":"landscape"}}}` - GET: https://how.box/mcp/run/box_template_plan?length_mm=80&width_mm=50&height_mm=100&style=lid&thickness_mm=0.5&lid_depth_mm=25&fold=50&legend=Cut+the+bold+lines&paper=a4&orientation=landscape ## How it works A box is a flat shape that folds into a solid, called a net. This tool draws the net for the size you give, at its real size, with cut lines, fold lines and the flaps that get glued. The tuck-end style is one piece with a lid that tucks into the front. The lid style is two open trays, a base and a lid that slides over it. Card has thickness, and every fold uses a little of it. So each panel is the inner measure plus the card thickness, the tuck tab is a little narrower than the opening, and the lid tray is a little larger than the base tray. For a thin card the extra is a fraction of a millimetre, for corrugated board it matters a lot. The sizes are a practical rule for card up to about 1 millimetre, so test a paper copy first. A net bigger than the paper is split over several sheets. Each has crop marks and an overlap strip, so you trim and tape them edge to edge. The 3D preview folds the very same panels, walls first, then the closures, then the tuck tabs. ## FAQ **Is the size inner or outer?** Inner. It is the space inside the box for the thing you want to put in it. The outside is a little larger, by the thickness of the card. **What thickness should I use?** Measure your card. Printer paper is about 0.1 mm, thin card 0.3 mm, a cereal box 0.4 mm and corrugated board 1.5 to 3 mm. Heavy board may need score lines before folding. **Which style is easier?** The tuck-end box is one piece with a single glued seam, the lid style has no glue seam on the walls except the small corner tabs, but you make two trays. **The box is bigger than a sheet. What now?** It prints on several sheets with overlap strips and crop marks. Cut along the crop marks, overlap the strips and tape the sheets edge to edge before cutting out the net. **Will it print at the right size?** Print at 100 percent or actual size, not fit to page. Check the 50 mm line on the first sheet with a ruler. **Can I make a cube?** Yes. Give the same length, width and height. For a cube, the lid style works well, and the tuck-end style makes a classic gift box. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)