# Clinometer > How tall is that tree or building? Aim the top edge of your phone at the top, step back a measured distance and read the height. Sensor readings stay on your device. Measure the height of a tree or building with your phone: aim at the top, enter your distance and eye height, and trigonometry gives the height. - Page: https://how.box/clinometer/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/clinometer/?d={d}&e={e}&a={a}&u={u} - `d` (number 0.5 to 1000): Distance from you to the foot of the object, 0.5–1000, in the chosen unit. Example: `20`. - `e` (number 0 to 10): Height of your eye above the ground, 0–10, in the chosen unit. Example: `1.6`. - `a` (number -45 to 89): Angle up to the top of the object, degrees, −45 to 89. Example: `40`. - `u` (m or ft): Length unit: m or ft. Example: `ft`. Example answer: https://how.box/clinometer/?d=20&e=1.6&a=40&u=ft The page computes the answer in the browser: read results from the agent tools below, not from the page HTML. ## Agent tools - `clinometer_object_height`: Height of a tall object (tree, building) from trigonometry on level ground: height = eye_height + distance × tan(angle_deg). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"clinometer_object_height","arguments":{"distance":20,"eye_height":1.6,"angle_deg":40,"unit":"ft"}}}` - GET: https://how.box/mcp/run/clinometer_object_height?distance=20&eye_height=1.6&angle_deg=40&unit=ft ## How it works The tree, the ground and your line of sight to the top form a right triangle. You know the horizontal side (your distance) and the angle at your eye, so the vertical side follows from the tangent: above-eye height = distance × tan(angle). Add the height of your eye above the ground and you have the height of the object. The steeper the angle, the more a small error in it matters, so stand back until the angle to the top is about 30 to 45 degrees. Measure your distance along level ground, and remember that the height of your eye is part of the answer. Phone sensors are good to about half a degree; ground that slopes, a leaning tree or a top you cannot see clearly all add error. Treat the answer as an estimate to the nearest few percent, not a survey. ## FAQ **Is my motion data stored or sent?** No. The sensor reading is used on your device to show the angle and is never stored, logged or put in the address. **How far from the tree should I stand?** Far enough that the angle to the top is between about 30 and 45 degrees. That is roughly a distance equal to the height of the tree. **Do I need the sensor?** No. You can type any angle, for example one read from an app or a protractor with a plumb line, and the height is calculated the same way. **What if the ground is sloping?** The formula assumes level ground. On a slope, measure the angle to the base of the tree as well and use the difference, or find level ground. **Why does it say the top would be at or below the ground?** The angle you entered is negative or too small for your eye height. Aim up at the top and check that the angle is positive. **What is my eye height?** The height from the ground to your eye when standing, about 1.6 metres or 5 feet 3 inches for many adults. Measure it against a wall if you want to be exact. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)