# Density altitude > How high is the density altitude today? Pressure and density altitude of your airfield from elevation, QNH and temperature, with what the thin air means for take-off. Work out pressure altitude and density altitude from field elevation, QNH and temperature, with the dew point, the ISA deviation and the rule of thumb. - Page: https://how.box/density-altitude/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/density-altitude/?e={e}&eu={eu}&q={q}&qu={qu}&t={t}&d={d}&tu={tu} - `e` (number): Field elevation in the unit eu. Example: `2000`. - `eu` (ft or m): Elevation unit: ft or m. Example: `ft`. - `q` (number): Altimeter setting QNH in the unit qu. Example: `1013`. - `qu` (hpa or inhg): Pressure unit: hpa or inhg. Example: `hpa`. - `t` (number): Outside air temperature in the unit tu. Example: `30`. - `d` (text): Optional dew point in the unit tu; omitted means dry air. Example: `15`. - `tu` (c or f): Temperature unit: c or f. Example: `c`. Example answer: https://how.box/density-altitude/?e=2000&eu=ft&q=1013&qu=hpa&t=30&d=15&tu=c A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `density_altitude_calculate`: Pressure altitude and density altitude of an airfield from its elevation, the altimeter setting QNH and the outside air temperature, with an optional dew point for the humidity effect (US NWS virtual-temperature method). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"density_altitude_calculate","arguments":{"elevation":2000,"elevation_unit":"ft","qnh":1013,"pressure_unit":"hpa","temperature":30,"dew_point":15,"temperature_unit":"c"}}}` - GET: https://how.box/mcp/run/density_altitude_calculate?elevation=2000&elevation_unit=ft&qnh=1013&pressure_unit=hpa&temperature=30&dew_point=15&temperature_unit=c ## How it works An aircraft’s wings, propeller and engine feel the density of the air, not the height on the map. Density altitude is the height in the standard atmosphere (ICAO Doc 7488) where the air is as dense as it is at your field right now. Hot, high and humid air is thin, so the aircraft behaves as if the runway were higher: it needs a longer take-off roll and climbs more slowly. First the QNH gives the pressure altitude: what the altimeter would show on the standard setting of 1013.25 hPa (29.92 inHg). Then the air density ρ = p / (R · T), from that pressure p, the temperature T and the gas constant of air R, is found in the standard atmosphere. A dew point lowers the density a little more, through the virtual temperature (US National Weather Service method). Pilots’ rule of thumb from the FAA Pilot’s Handbook of Aeronautical Knowledge is close: add 120 ft for every °C above the standard temperature. Example: a field at 2,000 ft with QNH 1013 hPa and 30 °C. The pressure altitude is about 2,000 ft, where the standard temperature is 11 °C, so the day is ISA +19 °C. The density altitude comes to about 4,170 ft (the rule of thumb gives 4,280 ft): the aircraft performs as if the field were more than 2,000 ft higher. ## FAQ **What is the difference between pressure altitude and density altitude?** Pressure altitude only corrects the elevation for the day’s air pressure: it is what the altimeter shows on 1013.25 hPa. Density altitude also corrects for temperature (and humidity), so it tells how the aircraft will perform. **Why does humidity raise the density altitude?** A water vapour molecule is lighter than the nitrogen and oxygen it replaces, so humid air is less dense than dry air at the same pressure and temperature. The effect is usually a few hundred feet on a hot, humid day. **Where do I get the QNH?** From the airport’s METAR or ATIS, or by setting the altimeter to the field elevation on the ground and reading the setting window. **Why is the rule of thumb different from the exact answer?** The 120 ft per °C rule is a straight-line approximation of the standard atmosphere. It is good to about a hundred feet on ordinary days and drifts further on very hot or high fields. **Can density altitude be below sea level?** Yes. Cold, high-pressure air can be denser than standard sea-level air. A negative result describes air density, not the physical elevation of the field. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)