# Descent planner > How far out should I start descending? Top of descent, vertical speed and time for a path angle or a descent rate, with the 3:1 rule beside the exact answer. Where to start down and how fast to descend: top-of-descent distance, vertical speed and time on a 3° path or your rate, the 3:1 rule and glide range. - Page: https://how.box/descent/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/descent/?a={a}&t={t}&au={au}&gs={gs}&su={su}&p={p}&ang={ang}&vs={vs}&vu={vu}&gr={gr} - `a` (number -2000 to 60000): Current altitude in the unit of au. Example: `10000`. - `t` (number -2000 to 60000): Altitude at the target point in the unit of au. Example: `2000`. - `au` (ft or m): Altitude unit: ft or m. Example: `ft`. - `gs` (number 1 to 1200): Ground speed in the unit of su. Example: `120`. - `su` (kt, kmh or mph): Speed unit (and distance unit): kt (NM), kmh (km) or mph (mi). Example: `kt`. - `p` (angle or rate): Plan by path angle (angle) or by vertical speed (rate). Example: `angle`. - `ang` (number 0.5 to 15): Path angle in degrees, used when p=angle. Example: `3`. - `vs` (number 0.5 to 10000): Vertical speed in the unit of vu, used when p=rate. Example: `500`. - `vu` (fpm or ms): Vertical speed unit: fpm (ft/min) or ms (m/s). Example: `fpm`. - `gr` (number 1 to 80): Glide ratio (9 for 9:1) for the glide range. Example: `9`. Example answer: https://how.box/descent/?a=10000&t=2000&au=ft&gs=120&su=kt&p=angle&ang=3&vs=500&vu=fpm&gr=9 A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `descent_calculate`: Descent planning (FAA-H-8083-16B ch. - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"descent_calculate","arguments":{"altitude":10000,"target":2000,"altitude_unit":"ft","ground_speed":120,"speed_unit":"kt","method":"angle","angle":3,"rate":500,"rate_unit":"fpm","glide_ratio":9}}}` - GET: https://how.box/mcp/run/descent_calculate?altitude=10000&target=2000&altitude_unit=ft&ground_speed=120&speed_unit=kt&method=angle&angle=3&rate=500&rate_unit=fpm&glide_ratio=9 ## How it works A descent is planned backwards from where you want to be: the height to lose, divided by the height lost per mile on your path, gives the distance from the target at which to start down, the top of descent. The vertical speed then follows from how fast you cover those miles. On a path of angle θ an aircraft loses 6,076 × tan θ feet per nautical mile, about 318 ft per NM at 3°. The vertical speed in ft/min is the ground speed in knots × that gradient ÷ 60. Example: from 10,000 ft down to 2,000 ft is 8,000 ft; on a 3° path that takes 8,000 ÷ 318 ≈ 25.1 NM, and at 120 kt the vertical speed is 120 × 318 ÷ 60 ≈ 640 ft/min, for about 12½ minutes. The 3:1 rule of thumb says 3 NM per 1,000 ft (24 NM) and ground speed × 5 (600 ft/min). Planning by vertical speed works the same way in reverse. Source: FAA Instrument Procedures Handbook (FAA-H-8083-16B), chapter 4. The glide range is the height to lose × the glide ratio, in still air: with a 9:1 ratio, 8,000 ft takes you about 12 NM. A headwind shortens it and a tailwind lengthens it, and the flight manual's ratio holds only at the best glide speed (FAA Pilot's Handbook of Aeronautical Knowledge, FAA-H-8083-25C, chapter 5). The answer assumes a constant ground speed and path, but the wind changes with height and you usually slow down as you descend, so keep a margin. It is for learning and simulators, not for flight planning or navigation: follow the published procedures and air traffic control. ## FAQ **What is the 3:1 rule?** A quick way to plan a 3° descent: allow 3 nautical miles for every 1,000 ft to lose, and descend at about five times your ground speed in ft/min. It is close to the exact 3° answer, a little early on distance and a little slow on rate. **Why use ground speed rather than airspeed?** The distance to the target is covered over the ground, so the wind matters: with a tailwind you cover the miles faster and need a higher vertical speed to stay on the same path. **What path angle should I use?** 3° is the standard for instrument approaches and a comfortable descent for most aircraft. Some airports with obstacles nearby publish steeper approaches, and gliders and helicopters fly very different angles. **What does the glide ratio mean?** How far the aircraft glides forward for each unit of height it loses without engine power. A ratio of 9:1 means 9,000 ft forward for every 1,000 ft down, in still air at the best glide speed. **Should the target be an altitude or a height above the runway?** Use the same reference for the current and target altitudes. The calculator subtracts them; mixing sea-level altitude with height above the runway gives the wrong height to lose. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)