# °dH to ppm > How many ppm is a hardness in °dH? Multiply °dH by 17.85 to get ppm as CaCO₃, or enter any hardness. Convert °dH to ppm: one German degree is 17.85 mg/L as calcium carbonate, so 10 °dH is 178.5 ppm. Enter your water’s hardness and see all units. A preset of [Water hardness converter](https://how.box/water-hardness/). - Page: https://how.box/dh-to-ppm/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/dh-to-ppm/?v={v}&from={from}&to={to} - `v` (number 0 to 1e9): The value to convert, in the from unit. Example: `10`. - `from` (mmol_l, mg_l_caco3, dh, fh or clark): Unit of v (unit id: mmol_l, mg_l_caco3, dh, fh, clark). Example: `dh`. - `to` (mmol_l, mg_l_caco3, dh, fh or clark): Unit to convert to (unit id). Example: `mmol_l`. Example answer: https://how.box/dh-to-ppm/?v=10&from=dh&to=mmol_l A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `water_hardness_convert`: Converts total water hardness between mmol/L (Ca²⁺ + Mg²⁺), mg/L as CaCO₃ (ppm), German degrees °dH (10 mg CaO/L), French degrees °fH (10 mg CaCO₃/L) and English (Clark) degrees °e (1 grain CaCO₃ per imperial gallon), using DIN 38409-6 / ISO 6059 and the CaCO₃ molar mass 100.086 g/mol. - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"water_hardness_convert","arguments":{"value":10,"from_unit":"dh","to_unit":"mmol_l"}}}` - GET: https://how.box/mcp/run/water_hardness_convert?value=10&from_unit=dh&to_unit=mmol_l ## How it works One German degree is 10 mg of calcium oxide per litre. Expressed as calcium carbonate, the usual basis for ppm, that is 17.85 mg/L, because the two compounds have different molar masses. So °dH to ppm is a multiplication by 17.85, not by 10: 10 °dH is 178.5 ppm. The USGS sorts water by mg/L as calcium carbonate: soft up to 60, moderately hard up to 120, hard up to 180 and very hard above. In °dH those limits are about 3.4, 6.7 and 10.1. The ppm here is a hardness, not a salt content. A TDS meter reads all dissolved solids, so its ppm is not a hardness, and a result as calcium alone is a different, smaller number. Check which basis a figure uses before comparing. Going back, divide by 17.85: 100 ppm is 5.6 °dH. Because the ppm here is a mass of calcium carbonate per litre, and a litre of water weighs about a kilogram, mg/L and ppm are used interchangeably. ## FAQ **How many ppm is 10 °dH?** About 178.5 ppm as calcium carbonate. **How do I convert ppm to °dH?** Divide by 17.85. For example 120 ppm is about 6.7 °dH. **Can I use a TDS meter to read hardness?** No. A TDS meter measures all dissolved solids, including salts that do not make water hard. Hardness is calcium and magnesium only. **What ppm counts as hard water?** The USGS calls 121 to 180 mg/L hard and anything above 180 very hard, as calcium carbonate. That is about 6.8 to 10.1 °dH, and above. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)