# E-series preferred values > Which standard resistor or capacitor value is closest? Find the nearest E3 to E192 value to the one you need, with its neighbours and error. Find the nearest standard resistor or capacitor value in E6, E12, E24, E96 or any E series, the values either side and the error, per IEC 60063. - Page: https://how.box/e-series/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/e-series/?k={k}&v={v}&s={s}&ru={ru}&cu={cu} - `k` (resistor or capacitor): resistor (default, ohms) or capacitor (farads). Example: `capacitor`. - `v` (number): The value you need, in ohms or farads. Example: `4.7e-8`. - `s` (E3, E6, E12, E24, E48, E96 or E192): E series: E3, E6, E12, E24, E48, E96 or E192. Example: `E24`. - `ru` (milliohm, ohm, kohm or megohm): Display unit of a resistance. Example: `kohm`. - `cu` (pf, nf, uf or farad): Display unit of a capacitance. Example: `nf`. Example answer: https://how.box/e-series/?k=capacitor&v=4.7e-8&s=E24&ru=kohm&cu=nf A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `e_series_nearest`: Nearest IEC 60063 preferred value (E3 to E192) to a resistor (ohms) or capacitor (farads) value, on a log scale (ties go to the lower value). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"e_series_nearest","arguments":{"kind":"capacitor","value":4.7e-8,"series":"E24","resistance_unit":"kohm","capacitance_unit":"nf"}}}` - GET: https://how.box/mcp/run/e_series_nearest?kind=capacitor&value=4.7e-8&series=E24&resistance_unit=kohm&capacitance_unit=nf ## How it works Resistors and capacitors are not made in every value. They come in fixed steps called E series, chosen so that the steps are the same in proportion: with ±10 % parts there is no point making values closer together than about 20 %, because the parts' own spread would overlap. A circuit design usually gives an exact number, and you need the standard part closest to it. Each series divides one decade, from 1 to 10, into n steps of equal ratio, roughly 10^(k/n): E12 has 12 values (1.0, 1.2, 1.5, 1.8, 2.2, 2.7, 3.3, 3.9, 4.7, 5.6, 6.8, 8.2), E24 has 24 and E96 has 96. The same steps repeat in every decade, so 4.7 Ω, 47 Ω and 4.7 kΩ are all E12 values. The nearest value is the one with the smallest ratio to yours: for 5 kΩ in E24 that is 5.1 kΩ, 2 % high. The lists are those of the standard IEC 60063, whose values are rounded and not exactly 10^(k/n). A part's real value can differ from its marking by its tolerance, so the nearest standard value is not a guarantee of the exact value. When a value matters, combine two parts in series or parallel, or use a trimmer. ## FAQ **Which series should I use?** E12 or E24 for everyday resistors (±5 %), E6 or E12 for most capacitors, and E96 when you buy 1 % metal-film resistors. **Why are the values not round numbers?** Each step is the same percentage bigger than the last, so the values follow a geometric series: 1, 1.2, 1.5, 1.8, 2.2 and so on, rounded. **What if my value falls exactly between two?** The tool picks the one with the smaller ratio, and the lower value on an exact tie. Both neighbours are shown, so you can choose the safer side for your circuit. **Does the nearest value include component tolerance?** No. It is the marked nominal value. Check the part’s tolerance separately. **Can I use this for capacitors?** Yes. Select capacitor and enter the capacitance in the chosen unit. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)