# Hz to RPM > How many RPM is a frequency in hertz? Multiply hertz by 60 to get revolutions per minute, or enter any frequency. Convert hertz to RPM: one revolution per second is 1 Hz, which is 60 revolutions per minute. Enter a frequency and see it in rpm, kHz, MHz and GHz. A preset of [Frequency converter](https://how.box/frequency/). - Page: https://how.box/hz-to-rpm/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/hz-to-rpm/?v={v}&from={from}&to={to} - `v` (number 0 to 1e15): The value to convert, in the from unit. Example: `50`. - `from` (rpm, hz, khz, mhz or ghz): Unit of v (unit id: rpm, hz, khz, mhz, ghz). Example: `hz`. - `to` (rpm, hz, khz, mhz or ghz): Unit to convert to (unit id). Example: `rpm`. Example answer: https://how.box/hz-to-rpm/?v=50&from=hz&to=rpm A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `frequency_convert`: Converts a frequency between units using exact definitions (1 Hz = 1 s⁻¹, 1 kHz = 1000 Hz, 1 MHz = 10⁶ Hz, 1 GHz = 10⁹ Hz, 1 rpm = 1/60 Hz; BIPM SI Brochure Tables 4 and 7, NIST SP 811 B.8). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"frequency_convert","arguments":{"value":50,"from_unit":"hz","to_unit":"rpm"}}}` - GET: https://how.box/mcp/run/frequency_convert?value=50&from_unit=hz&to_unit=rpm ## How it works A hertz counts cycles per second and rpm counts turns per minute, so Hz × 60 = rpm. 50 Hz is 3,000 rpm and 25 Hz is 1,500 rpm. The factor holds whenever one cycle is one turn: a shaft, a fan, a rotating field. Changing the frequency changes the speed in proportion: half the frequency, half the speed, and 3,000 rpm is 50 Hz. For an AC motor the supply sets the speed of the rotating field, called the synchronous speed. A two-pole motor turns once per cycle, a four-pole motor half as fast and a six-pole motor a third, as the table shows. Under load the shaft runs a little slower than this. The slip to avoid is dividing instead of multiplying. For a sensor that gives pulses, divide the pulse frequency by the pulses per revolution before converting: 100 Hz at 2 pulses per turn is 50 turns a second, 3,000 rpm. ## FAQ **How many rpm is 60 Hz?** 3,600 rpm for a two-pole motor, 1,800 rpm for a four-pole motor and 1,200 rpm for a six-pole motor. **Why is my motor slower than the table says?** A loaded motor slips behind the rotating field, usually by a few per cent. The table gives the speed of the field. **How do I get rpm from a tachometer pulse signal?** Divide the pulse frequency by the pulses per revolution to get turns per second, then multiply by 60. **Can I use this to set a drive's frequency from a target speed?** Yes, in reverse: divide the speed by 60 for a two-pole motor, and multiply by the number of poles divided by two for the others. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)