# Inclined plane calculator > Will it slide down the slope? The forces on a block on a slope with friction, whether it slides and how fast it speeds up, drawn as arrows live. Find the normal force, friction and acceleration of a block on a slope, see if static friction holds it, and drag the slope to watch the force arrows change. - Page: https://how.box/inclined-plane/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/inclined-plane/?a={a}&m={m}&mu={mu}&us={us}&uk={uk} - `a` (number 0 to 90): Slope angle, degrees. Example: `30`. - `m` (number 0 to 1e9): Mass of the block in mu. Example: `10`. - `mu` (kg or lb): kg or lb. Example: `kg`. - `us` (number 0 to 5): Coefficient of static friction. Example: `0.5`. - `uk` (number 0 to 5): Coefficient of kinetic friction. Example: `0.4`. Example answer: https://how.box/inclined-plane/?a=30&m=10&mu=kg&us=0.5&uk=0.4 A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `inclined_plane_calculate`: Forces on a block released from rest on a slope with friction, on Earth (g = 9.80665 m/s²). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"inclined_plane_calculate","arguments":{"angle_deg":30,"mass":10,"mass_unit":"kg","static_friction":0.5,"kinetic_friction":0.4}}}` - GET: https://how.box/mcp/run/inclined_plane_calculate?angle_deg=30&mass=10&mass_unit=kg&static_friction=0.5&kinetic_friction=0.4 ## How it works Gravity pulls the block straight down with its weight, m·g. On a slope that weight splits in two: one part, m·g·sin θ, pulls the block down along the slope, and the other, m·g·cos θ, presses it into the surface. The slope pushes back with the same normal force N, and friction, which can reach μ·N, acts along the surface against the motion. At rest, friction holds the block as long as m·g·sin θ ≤ μs·m·g·cos θ, that is while tan θ ≤ μs: the block starts to slide at θ = atan μs, whatever its mass. Once it slides, kinetic friction μk·N is usually a little weaker, and the block speeds up at a = g·(sin θ − μk·cos θ). A 10 kg block on a 30° wooden slope (μs 0.5, μk 0.4) feels 49 N down the slope against at most 42 N of static friction, so it slides at 9.81 × (0.5 − 0.4 × 0.866) ≈ 1.5 m/s². Friction coefficients depend on the materials and their surfaces: about 0.5 for wood on wood, 0.7 for rubber on dry asphalt and under 0.1 for steel on ice, so treat them as estimates. The block is assumed to slide, not roll, without air drag. Formulas from OpenStax University Physics, volume 1, section 6.2 (openstax.org). ## FAQ **Can this model a block that is already moving uphill?** No. It starts with a block released from rest and checks whether it slides downhill. An uphill-moving block has friction acting downhill and needs a different force calculation. **How do I measure the coefficient of static friction?** Tilt the slope slowly until the block just starts to move, and read the angle: μs = tan θ. At 27° that is about 0.5. **Why are there two friction coefficients?** Surfaces at rest interlock a little more than surfaces sliding past each other, so it takes more force to start a block moving (static) than to keep it moving (kinetic). **Is static friction always equal to its maximum value?** No. While the block stays at rest, static friction supplies just enough force to balance the pull downhill. Its maximum is the limit before sliding starts. **Can I enter a slope as a percentage grade?** The input takes degrees, not percent. Convert the grade first with angle = arctan(grade ÷ 100); a 100% grade is 45°, not 90°. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)