# Level > How level is your surface? Lay your phone on a shelf, floor or worktop, or stand it against a wall, to see the tilt in degrees. Readings stay on your device. Use your phone as a spirit level: a bubble vial and the tilt in degrees, percent and mm per metre. Calibrate on any surface, hold a reading. - Page: https://how.box/level/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/level/?m={m}&a={a} - `m` (flat or edge): Mode: flat (phone lies on the surface) or edge (phone stands against it). Example: `edge`. - `a` (number -89 to 89): The angle to turn into a slope, in degrees from horizontal, −89…89, with the same sign as sensor roll (positive: right side lower). Example: `3`. Example answer: https://how.box/level/?m=edge&a=3 The page computes the answer in the browser: read results from the agent tools below, not from the page HTML. ## Agent tools - `level_describe_angle`: Turns an angle from horizontal into a slope, as a spirit level or inclinometer would report it. - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"level_describe_angle","arguments":{"angle_deg":3}}}` - GET: https://how.box/mcp/run/level_describe_angle?angle_deg=3 ## How it works A phone knows which way is down from its motion sensors, which feel gravity. The level takes that direction and works out how far the screen is from horizontal, then draws a bubble that drifts toward the high side like the bubble in a spirit level. The tilt is the angle θ between the screen and the horizontal. A slope is the same thing written as rise over run: percent = 100 × tan θ. A tilt of 2° is a slope of 3.5%, or about 35 mm of rise over one metre. Sensors are good to roughly half a degree, so use a real spirit level for work that must be exact. Phone cases, bumps and a warm sensor all add error. Put the phone on the surface the same way up each time, use Zero on this surface on a surface you know is flat, and check a reading by turning the phone around: it should show the same angle. ## FAQ **Is my motion data stored or sent?** No. The sensor readings are used on your device to draw the bubble and are never stored, logged or put in the address. **Why does it say not available on this device?** Computers and some browsers have no tilt sensor. Use a phone or tablet, or type an angle in the box below. **How accurate is a phone level?** Usually within about half a degree after zeroing on a flat surface. That is fine for hanging a shelf or checking a camera, not for precision machining. **How do I calibrate it?** Lay the phone on a surface you know is level, press Zero on this surface, then turn the phone around and check that it still reads level. **What is the difference between flat and on edge?** Flat measures how far the whole screen is from horizontal. On edge is for a phone standing against a wall or frame: it reads how far its horizontal side is from level. **How do I turn degrees into a percent slope?** Take the tangent of the angle and multiply by 100. For 2° that is 3.5%; type the angle below to see it. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)