# Light meter > How should you set your camera in this light? Pick the light you are in and get the aperture and shutter speed to set for your ISO. An exposure meter: enter or measure the exposure value (EV) of a scene and get matching aperture and shutter speed pairs for your ISO. - Page: https://how.box/light-meter/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/light-meter/?e={e}&i={i} - `e` (number -6 to 20): Scene exposure value at ISO 100. Example: `13`. - `i` (number 25 to 102400): ISO speed. Example: `400`. Example answer: https://how.box/light-meter/?e=13&i=400 The page computes the answer in the browser: read results from the agent tools below, not from the page HTML. ## Agent tools - `light_meter_exposure`: Equivalent exposures for a scene: for each aperture from f/1.4 to f/22 the shutter time that gives a correct exposure. - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"light_meter_exposure","arguments":{"ev":13,"iso":400}}}` - GET: https://how.box/mcp/run/light_meter_exposure?ev=13&iso=400 ## How it works Exposure is how much light reaches the sensor. An aperture, a shutter time and an ISO set it together, and the exposure value summarises the light of the scene in one number: each step is one stop, a doubling or halving of the light. Pairs such as f/8 at 1/125 s and f/5.6 at 1/250 s let in the same light. EV = log2(N² ÷ t), where N is the f-number and t the shutter time in seconds, at ISO 100. A different ISO S shifts it by log2(S ÷ 100). At EV 13 and ISO 100 the shutter for f/8 is t = N² ÷ 2^EV = 64 ÷ 8192 = 1/128 s, shown as the nearest standard 1/125 s. The daylight scenes follow the Sunny 16 rule: f/16 at 1/ISO in bright sun is EV 14.6. A phone camera sets its own exposure, so it cannot say how bright a scene really is. The page uses it only to follow the change in light against a reference view, in stops of linear light, which is rough: lock the exposure if you can, or trust a typed EV. The pairs are rounded to the nearest third-stop shutter time, so they can be off by up to a sixth of a stop. For fine work use a hand-held meter. ## FAQ **What is exposure value (EV)?** A single number for a combination of aperture and shutter time, or for the light of a scene. Each +1 means twice the light, so the camera needs one stop less exposure. **What EV is a sunny day?** About 15 for bright sun with hard shadows, 13 for a bright cloudy day and 12 for heavy overcast, at ISO 100. A lit living room is around 6 to 7. **Why can't the camera give the exact EV?** A phone camera adjusts its exposure and gain by itself and the page cannot read those settings, so it only sees how the light changes compared with a reference. **How does ISO change the shutter time?** Doubling the ISO halves the shutter time for the same aperture, one stop. Going from ISO 100 to ISO 400 is two stops. **What is the Sunny 16 rule?** On a bright sunny day set f/16 and a shutter time of 1/ISO, for example 1/100 s at ISO 100. Each darker kind of weather opens the aperture one stop. **Why is the result 'faster than 1/8000 s'?** The scene is too bright for that aperture and ISO at the fastest shutter time. Close the aperture or lower the ISO. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)