# METAR and TAF decoder > How do you read a METAR or TAF? Paste an aviation weather report and read every group in plain words, with the flight category, humidity and density altitude. Decode any METAR, SPECI or TAF group by group: wind, visibility, runway visual range, weather, clouds, QNH and forecast changes, with flight category. - Page: https://how.box/metar/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/metar/?r={r} - `r` (text): The report to decode (METAR, SPECI or TAF). Example: `EFHK 131050Z 22012KT 9999 FEW020 12/07 Q1013`. Example answer: https://how.box/metar/?r=EFHK+131050Z+22012KT+9999+FEW020+12%2F07+Q1013 The page computes the answer in the browser: read results from the agent tools below, not from the page HTML. ## Agent tools - `metar_decode`: Decodes one METAR, SPECI or TAF aviation weather report (WMO FM 15/16/51, ICAO Annex 3, US practice per FAA AC 00-45H) into structured JSON: type, station (ICAO), station_name and station_elevation_ft (OurAirports; null when unknown or the airport data could not load), issue time (day of month and UTC), validity, wind (direction degrees true or null if variable, speed and gust in the reported unit kt/ms/kmh), visibility in metres (and statute miles when reported), runway visual range, present weather (WMO 4678 codes), cloud layers (base in ft above the aerodrome, CB/TCU), temperature and dew point (°C), QNH (hPa; inHg for US A-groups), relative humidity (%), pressure and density altitude at the station (ft; null without its elevation), the US flight category (VFR/MVFR/IFR/LIFR from ceiling and visibility), each trend or TAF change period (BECMG, TEMPO, FM, PROB30/40) with its conditions, remarks as written, and any unrecognised groups. - Page only: runs on this page (WebMCP), not over MCP. ## How it works A METAR is the routine weather observation of an airport, usually made every 30 or 60 minutes; a SPECI is a special one made when the weather changes significantly. A TAF is the airport's forecast for the next 9 to 30 hours. All three use the same short groups, defined by the World Meteorological Organization (WMO No. 306, FM 15, FM 16 and FM 51) and ICAO Annex 3, so a pilot anywhere can read them. The United States uses statute miles, inches of mercury and its own remarks (FAA AC 00-45H). Each group has a fixed form: 24008KT is wind from 240° at 8 knots, 9999 is visibility of 10 km or more, BKN025CB is a broken layer of cumulonimbus at 2,500 ft, 07/05 is temperature and dew point in °C, and Q1021 is the sea-level pressure setting (QNH) in hectopascals. In a TAF, BECMG marks a gradual change, TEMPO short spells, FM a complete change from a time, and PROB30 or PROB40 a chance in percent. Relative humidity comes from the temperature and dew point (Bolton 1980), density altitude from the QNH, temperature and the airport's elevation by the US National Weather Service method. The flight category follows the US convention (FAA AIM 7-1-7): LIFR below 500 ft ceiling or 1 statute mile, IFR below 1,000 ft or 3 miles, MVFR up to 3,000 ft or 5 miles, otherwise VFR. Reports here are decoded as written: nothing is fetched, so check the time group (day of the month and UTC) to see how old a report is. Remarks (RMK) are national and are shown as they are. This is for learning and curiosity, never for flight planning. ## FAQ **What is the difference between a METAR and a TAF?** A METAR tells what the weather is now at an airport; a TAF forecasts it for the next 9 to 30 hours. A METAR may end with a trend for the next two hours (NOSIG, BECMG or TEMPO). **What does CAVOK mean?** Ceiling and visibility OK: visibility 10 km or more, no cloud below 5,000 ft (or the highest minimum sector altitude), no cumulonimbus or towering cumulus, and no significant weather. **Why is the time in Z?** Z (Zulu) is UTC. 131050Z means the 13th day of the month at 10:50 UTC; the month and year are not given. **What are FEW, SCT, BKN and OVC?** Cloud cover in eighths of the sky (oktas): FEW 1–2, SCT scattered 3–4, BKN broken 5–7 and OVC overcast 8. The three digits after them are the base height in hundreds of feet above the airport. **What do the minus and plus signs mean?** Intensity: -RA is light rain, RA moderate rain and +RA heavy rain. VC means the weather is near the airport, within about 8 km, but not at it. **What is the ceiling?** The height of the lowest layer that covers more than half the sky (BKN or OVC), or the vertical visibility when the sky is obscured (VV). Pilots use it with the visibility to judge whether they can fly by sight. **Can it fetch the latest METAR for an airport?** Not yet. Paste a report from your weather briefing or an official service; nothing you paste is sent anywhere. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)