# Pulley calculator > How much easier do pulleys make a lift? Block and tackle: the pull to lift a load, the mechanical advantage and the rope you haul in, with the rope segments drawn and counted live. Find the pull needed to lift a load with a block and tackle, its mechanical advantage and how much rope to haul, with every rope segment drawn and counted. - Page: https://how.box/pulleys/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/pulleys/?n={n}&m={m}&mu={mu}&h={h}&lu={lu}&e={e} - `n` (whole number 1 to 12): Supporting rope segments, 1 to 12. Example: `4`. - `m` (number 0 to 1e6): Mass of the load in mu. Example: `100`. - `mu` (kg or lb): kg or lb. Example: `kg`. - `h` (number 0 to 10000): Lift height in lu. Example: `1`. - `lu` (m or ft): m or ft. Example: `m`. - `e` (number 0 to 100): Overall efficiency, percent. Example: `100`. Example answer: https://how.box/pulleys/?n=4&m=100&mu=kg&h=1&lu=m&e=100 A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `pulleys_calculate`: Block and tackle: effort to lift a load with n rope segments holding the moving block, effort = W/(n·η), rope pulled = n × lift (g = 9.80665 m/s²). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"pulleys_calculate","arguments":{"segments":4,"load_mass":100,"mass_unit":"kg","lift":1,"length_unit":"m","efficiency":100}}}` - GET: https://how.box/mcp/run/pulleys_calculate?segments=4&load_mass=100&mass_unit=kg&lift=1&length_unit=m&efficiency=100 ## How it works A pulley that hangs from the ceiling only turns the pull around. Pulleys that move with the load share it out: every rope segment holding the moving block carries the same tension, the force you pull with. With n segments holding up a load of weight W, each carries W ÷ n, so the ideal mechanical advantage is n. Nothing is free: to raise the load by h, each of the n segments has to shorten by h, so you pull n × h of rope. Lifting 100 kg (981 N) with four segments takes 981 ÷ 4 ≈ 245 N, and raising it 1 m means hauling 4 m of rope. Work in, 245 N × 4 m, equals work out, 981 N × 1 m. Friction in the pulleys means you need a little more: the efficiency η divides the pull, effort = W ÷ (n·η). The rope and pulleys are taken as weightless and the segments as vertical. Based on OpenStax College Physics 2e, section 9.5 (openstax.org). ## FAQ **How do I count the supporting segments?** Count the strands of rope that go into the moving block or are tied to it. Leave out the free end you pull, unless it also leaves the moving block. **Does a single fixed pulley make lifting easier?** It does not reduce the force: the advantage is 1. It only lets you pull down instead of up, so you can use your body weight. **Why not use 20 pulleys?** Each pulley adds friction and rope to pull, so the real advantage grows less than the count, and you must haul ever more rope for each centimetre of lift. **What efficiency is realistic?** Good ball-bearing pulleys lose only a few percent each; plain sheaves with a stiff rope can lose ten percent or more per pulley. **Does the efficiency setting apply to each pulley or the whole system?** It applies to the whole system. Enter one overall efficiency, including all pulley and rope losses, rather than the efficiency of a single sheave. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)