# Epoxy resin calculator > How much epoxy resin do I need? Resin and hardener for a mould, coaster, river table or flood coat, by volume or weight, with extra for the cup. How much epoxy resin and hardener a mould, river table, coaster or flood coat needs, from its size and the mix ratio by volume or weight, with a waste margin. - Page: https://how.box/resin/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/resin/?k={k}&l={l}&w={w}&dm={dm}&d={d}&n={n}&u={u}&du={du}&a={a}&b={b}&r={r}&y={y}&x={x} - `k` (rectangle, round or coat): What is poured: rectangle, round or coat. Example: `rectangle`. - `l` (number 0.001 to 100): Length in metres (rectangle and coat). Example: `0.3`. - `w` (number 0.001 to 100): Width in metres (rectangle and coat). Example: `0.2`. - `dm` (number 0.001 to 100): Diameter in metres (round). Example: `0.1`. - `d` (number 0.0001 to 1): Depth or coat thickness in metres. Example: `0.01`. - `n` (whole number 1 to 1000): How many pieces, 1–1000. Example: `1`. - `u` (cm, mm, m, in or ft): Length unit shown: cm, mm, m, in or ft. Example: `cm`. - `du` (mm, cm or in): Depth unit shown: mm, cm or in. Example: `mm`. - `a` (number 0.1 to 1000): Parts of resin in the mix ratio. Example: `1`. - `b` (number 0.1 to 1000): Parts of hardener in the mix ratio. Example: `1`. - `r` (volume or weight): Ratio by volume or by weight. Example: `volume`. - `y` (number 0.5 to 3): Density of the mixed resin in g/ml. Example: `1.1`. - `x` (number 0 to 50): Extra allowance, percent. Example: `10`. Example answer: https://how.box/resin/?k=rectangle&l=0.3&w=0.2&dm=0.1&d=0.01&n=1&u=cm&du=mm&a=1&b=1&r=volume&y=1.1&x=10 A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `resin_calculate`: Epoxy resin for a box mould or table (length × width × depth), a round mould (π × (diameter/2)² × depth) or a flood coat (length × width × thickness), times count, plus waste %, split by the maker's mix ratio (ratio_a parts resin : ratio_b parts hardener, by volume or by weight). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"resin_calculate","arguments":{"form":"rectangle","length":0.3,"width":0.2,"diameter":0.1,"depth":0.01,"count":1,"unit":"cm","depth_unit":"mm","ratio_a":1,"ratio_b":1,"ratio_basis":"volume","density":1.1,"waste":10}}}` - GET: https://how.box/mcp/run/resin_calculate?form=rectangle&length=0.3&width=0.2&diameter=0.1&depth=0.01&count=1&unit=cm&depth_unit=mm&ratio_a=1&ratio_b=1&ratio_basis=volume&density=1.1&waste=10 ## How it works Epoxy resin is poured to a volume, so the first step is geometry: a box mould or river table is length × width × depth, a round mould is π × r² × depth (r is half the diameter), and a flood coat is the surface area times the thickness of the coat. Multiply by how many pieces you pour and add an allowance, because some resin always stays in the cup and on the stirrer. The mix ratio then splits the total. For a ratio of a : b, resin is a / (a + b) of the total and hardener b / (a + b). Ratios by volume and by weight are different things: 100:45 by weight is not 100:45 by volume, because the two parts differ in density. The tool converts between volume and weight with the density of the mixed resin (about 1.1 g/mL for casting epoxy). Example: a 30 × 20 cm mould 1 cm deep holds 600 mL; with 10 % extra that is 660 mL, or 330 mL of each part at 1:1, about 726 g in all. The numbers are an estimate. Resin systems differ in density and in how deep they may be poured in one layer, pot life and cure time depend on temperature and mass, and an inexact ratio can leave the resin soft or sticky. Follow the data sheet of your product and work in a ventilated space. ## FAQ **How do I calculate how much resin I need?** Work out the volume of the mould (length × width × depth, or π × radius² × depth for a round one), add about 10 % and split it by the mix ratio. The calculator does all of that. **Is the mix ratio by volume or by weight?** The data sheet says which. They are not interchangeable: a 100:45 ratio by weight needs a scale, while 1:1 or 2:1 by volume usually uses marked cups. **How much extra resin should I add?** Around 10 % is common, because resin clings to the cup, the stirrer and the mould. Add more for many small moulds or when a shallow pour must flood a surface. **How much resin does a river table take?** Measure the channel as a box (length × average width × depth) and enter it as a box mould. Check the product's maximum pour depth per layer: a deep channel may need several pours. **How much resin do I need for a flood coat?** Choose flood coat and enter the surface size and the thickness, often 1–3 mm. A 2 mm coat over 1 m² is 2 litres before the extra. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)