# RF level converter > How strong is this signal in other units? Convert dBm, dBW, dBµV, dBmV, watts and microvolts for a 50 or 75 ohm system. Convert an RF signal level between dBm, dBW, dBµV, dBmV, watts and microvolts for 50 ohm radio or 75 ohm video and cable TV systems. - Page: https://how.box/rf-level/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/rf-level/?from={from}&db={db}&x={x}&z={z} - `from` (dbm, dbw, dbuv, dbmv, watts or microvolts): dbm, dbw, dbuv, dbmv, watts or microvolts. Example: `dbm`. - `db` (number -400 to 400): Level in decibels, for the dB units. Example: `0`. - `x` (number 0 to 1e15): Value in watts or microvolts, for those units. Example: `1`. - `z` (number 0 to 10000): System impedance, ohms. Example: `50`. Example answer: https://how.box/rf-level/?from=dbm&db=0&x=1&z=50 A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `rf_level_calculate`: Convert an RF signal level between dBm, dBW, dBµV, dBmV, watts and RMS microvolts for a system impedance (50 ohm default, 75 ohm for video). - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"rf_level_calculate","arguments":{"from":"dbm","level_db":0,"linear":1,"impedance_ohms":50}}}` - GET: https://how.box/mcp/run/rf_level_calculate?from=dbm&level_db=0&linear=1&impedance_ohms=50 ## How it works Radio engineers state a signal level as power in decibels against a fixed reference, because levels span many orders of magnitude: a transmitter may put out +40 dBm (10 W) while a receiver hears −100 dBm (0.1 pW). Cable TV and field-strength work state the voltage instead, in dBµV or dBmV. The two are tied together by the impedance of the system, because power is voltage squared divided by resistance. The power is P = 1 mW × 10^(dBm/10), the RMS voltage across the impedance Z is V = √(P × Z), and dBµV = 20 × log₁₀(V / 1 µV). That makes dBµV = dBm + 90 + 10 × log₁₀(Z): 0 dBm is 106.99 dBµV in a 50 Ω system (a rule of thumb says +107) and 108.75 dBµV in a 75 Ω one. dBmV is 60 dB lower than dBµV. Example: 0 dBm = 1 mW = 223.6 mV across 50 Ω. The conversion assumes a matched, purely resistive system and a sine wave (RMS values). Peak or peak-to-peak voltages are larger by √2 or 2√2. Sources: Wikipedia on the decibel and dBm, and the ARRL Handbook. ## FAQ **What is the difference between dBm and dBW?** Both are power relative to a reference: dBm is relative to one milliwatt and dBW to one watt, so dBW is always 30 less than dBm for the same power. **Why does the answer change between 50 and 75 ohms?** Power does not depend on impedance, but the voltage that carries it does. The same power is a larger voltage across 75 ohms than across 50, so the dBµV value is 1.76 dB higher. **Is dBm an absolute level?** Yes: 0 dBm is exactly 1 mW. A bare dB is only a ratio between two levels, which is why signal strengths on receivers are shown in dBm. **What do −70 or −90 dBm mean on Wi-Fi?** They are received powers of 100 pW and 1 pW. Around −67 dBm is considered good enough for video streaming, and below about −80 dBm the link becomes unreliable. **Can I use this for audio levels?** Not directly. Audio uses dBu and dBV against fixed voltages; see the audio levels converter for those. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)