# Sound meter > How loud is it here? A decibel meter for your microphone: the live level, the lowest, average and highest, a one-minute graph and a classroom traffic light. Phone microphones are not calibrated, so it is an estimate. Measure how loud it is with your microphone: live decibels, minimum, average and maximum, a one-minute graph and a classroom traffic light. Not calibrated. - Page: https://how.box/sound-meter/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/sound-meter/?o={o}&c={c}&q={q}&l={l} - `o` (number 0 to 150): Calibration offset in dB. Example: `90`. - `c` (boolean): Classroom traffic light on (1) or off (0). Example: `true`. - `q` (number 30 to 120): Green below this level in dB. Example: `60`. - `l` (number 30 to 120): Red at or above this level in dB. Example: `75`. Example answer: https://how.box/sound-meter/?o=90&c=1&q=60&l=75 The page computes the answer in the browser: read results from the agent tools below, not from the page HTML. ## Agent tools - `sound_meter_describe_level`: Says what a sound level in dB (SPL) is like and where it falls on the classroom traffic light. - MCP: POST https://how.box/mcp `tools/call` with `{"name":"sound_meter_describe_level","arguments":{…}}`; input schema in https://how.box/agent-tools.json. ## How it works Sound is a pressure wave, and its loudness is measured in decibels, a logarithmic scale: every 10 dB is about twice as loud to the ear, and 3 dB is twice the sound energy. Your microphone turns the wave into numbers up to a digital maximum, and the meter reports how far below that maximum the sound is (dBFS). A microphone does not know how loud the room really is, because its sensitivity and the gain your phone applies are unknown. The meter therefore adds a calibration offset, 90 dB by default, to the digital level to estimate sound pressure level in dB. The level follows the 125 ms Fast time weighting of IEC 61672, and the average is the energy mean, 10·log10 of the mean of 10^(L/10), not a simple mean of decibels. Treat the result as a guide: a few dB of error is likely, and a quiet room reads too high on most phones. Everyday comparisons, such as 60 dB for a conversation and 85 dB for heavy traffic, are typical values from NIOSH and CDC. Hearing damage becomes a risk with long exposure above about 85 dB(A); this page does not measure that. For work or legal needs use a calibrated meter. ## FAQ **Is this decibel meter accurate?** Not like a calibrated sound level meter. Phone microphones differ and adjust themselves, so expect an error of several decibels. Calibrating against a real meter helps. **How do I calibrate it?** Measure the same steady sound with a real sound level meter, then change the calibration offset until both agree. The offset is kept in the link only if you share it. **What is a safe noise level for a classroom?** Speech is comfortable when background noise stays below about 35 dB(A) in a quiet room, and ordinary lessons reach 60 dB. The traffic light limits are yours to set; 60 and 75 dB are only defaults. **Does the app record my voice?** No. The microphone is read only to measure the level, on your device, and the sound is discarded at once. **Why does a quiet room show 40 dB or more?** The microphone's own noise and the default offset put a floor under the reading. Lower the offset, or calibrate, if the quiet reads too high. **What does the average mean?** It is the energy average of all readings since you started: loud moments count more than quiet ones, as they do for your ears. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)