# VSWR calculator > How much power does a mismatch reflect? Convert VSWR, return loss, reflection coefficient and mismatch loss, or start from a load resistance on a 50 or 75 ohm line. Convert between VSWR, return loss in dB, reflection coefficient and mismatch loss, and see how much power an antenna or load reflects back. - Page: https://how.box/vswr/ - Runs entirely in the browser. - License: HowToolbox's own text and data (titles, explanations, FAQs, tool descriptions and schemas, this file) are CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/); AI training and answers are welcome. Attribute "HowToolbox (how.box)" with a link to the page used. Third-party data keeps its own terms; the name and logo are not licensed. Publisher: HowToolbox, contact@how.box. Terms: https://how.box/about/terms/ ## Inputs Answer link: https://how.box/vswr/?from={from}&vswr={vswr}&rl={rl}&g={g}&zl={zl}&z0={z0} - `from` (vswr, return_loss, reflection or load): vswr, return_loss, reflection or load. Example: `vswr`. - `vswr` (number 1 to 1000): VSWR as n:1. Example: `1.5`. - `rl` (number 0.01 to 100): Return loss, dB. Example: `20`. - `g` (number 0 to 0.999): Reflection coefficient magnitude. Example: `0.2`. - `zl` (number 0.001 to 1e6): Load resistance, ohms. Example: `75`. - `z0` (number 0.001 to 1e6): Line impedance Z0, ohms. Example: `50`. Example answer: https://how.box/vswr/?from=vswr&vswr=1.5&rl=20&g=0.2&zl=75&z0=50 A complete link carries the primary answer in the page HTML; a missing or invalid value shows the default page. ## Agent tools - `vswr_calculate`: Convert between VSWR, return loss, reflection coefficient, mismatch loss and reflected power on a transmission line. - MCP, one POST to https://how.box/mcp: `{"jsonrpc":"2.0","id":1,"method":"tools/call","params":{"name":"vswr_calculate","arguments":{"from":"vswr","vswr":1.5,"return_loss_db":20,"reflection":0.2,"load_ohms":75,"z0_ohms":50}}}` - GET: https://how.box/mcp/run/vswr_calculate?from=vswr&vswr=1.5&return_loss_db=20&reflection=0.2&load_ohms=75&z0_ohms=50 ## How it works When a transmission line is not terminated in its own impedance, part of the wave bounces back from the load and forms a standing wave on the line. VSWR (voltage standing wave ratio) is the ratio of the highest to the lowest voltage along that wave: 1:1 is a perfect match, and the bigger the number, the more is reflected. Return loss and mismatch loss say the same thing in decibels. The reflection coefficient is Γ = (Z_L − Z0) / (Z_L + Z0), where Z_L is the load and Z0 the line impedance. Then VSWR = (1 + |Γ|) / (1 − |Γ|), return loss RL = −20 log₁₀|Γ|, mismatch loss ML = −10 log₁₀(1 − |Γ|²), and the reflected share of power is |Γ|². A 75 Ω load on a 50 Ω line gives Γ = 0.2, VSWR 1.5, RL 14.0 dB and 4 % of the power reflected, a loss of just 0.18 dB. The tool treats the load as a pure resistance and ignores line loss, which hides reflections on a long lossy cable: a cable's own loss makes the VSWR measured at the radio look better than at the antenna. Sources: Pozar, Microwave Engineering, and Wikipedia on standing wave ratio and return loss. ## FAQ **What VSWR is good enough for an antenna?** Below 1.5:1 is excellent and below 2:1 is the usual limit for amateur radio; at 2:1 only 11 % of the power is reflected, a loss of about half a decibel. **Is a higher return loss better?** Yes. Return loss measures how far the reflected wave is below the forward wave, so 20 dB (VSWR 1.22) is a better match than 10 dB (VSWR 1.92). **Does reflected power get lost as heat?** Not directly. It travels back toward the transmitter, where some transmitters fold back their output to protect themselves, and some of it is absorbed by the cable's loss on the way. **Why can the VSWR be 1:1 with a different load impedance?** It cannot: VSWR 1:1 means Γ is zero, so the load equals the line impedance. A mismatch with a reactive part also shows as a VSWR above 1 even if the resistance is right. **Can I use this for 75 ohm video or cable TV?** Yes. Set the line impedance to 75 Ω and enter the load resistance, or enter the VSWR or return loss you measured. More: [HowToolbox index](https://how.box/llms.txt) · [Agent Skill](https://how.box/skill.md) · [agent terms](https://how.box/about/agents/)