How do you convert mmol/L to mg/dL?
Convert blood glucose between mmol/L and mg/dL, and HbA1c between mmol/mol and %, with the estimated average glucose.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Your reading
Glucose in both units
Common glucose values in mmol/L and mg/dL.
| mmol/L | mg/dL |
|---|---|
| 3.0 mmol/L | 54 mg/dL |
| 4.0 mmol/L | 72 mg/dL |
| 5.0 mmol/L | 90 mg/dL |
| 6.0 mmol/L | 108 mg/dL |
| 7.0 mmol/L | 126 mg/dL |
| 8.0 mmol/L | 144 mg/dL |
| 9.0 mmol/L | 162 mg/dL |
| 10.0 mmol/L | 180 mg/dL |
| 12.0 mmol/L | 216 mg/dL |
| 15.0 mmol/L | 270 mg/dL |
| 20.0 mmol/L | 360 mg/dL |
Good to know
- Labs and meters round their results, so a converted value can differ from a printed one by the last digit.
- The estimated average glucose comes from a study of 507 adults. Your own average can differ, for example with anaemia or some haemoglobin variants, and it says nothing about highs and lows.
- This converts units only. Ask your doctor or diabetes nurse what your results mean and before changing any treatment.
Convert blood glucose between mmol/L and mg/dL, and HbA1c between mmol/mol and %, with the estimated average glucose.
How to use
- Choose glucose for a meter or lab reading, or HbA1c for a long-term result.
- Enter the value and choose the unit it is in.
- Read it in the other unit; for HbA1c also the estimated average glucose.
How it works
Blood glucose is measured in two units around the world. Millimoles per litre (mmol/L) count glucose molecules; milligrams per decilitre (mg/dL) weigh them. HbA1c, the share of haemoglobin with sugar attached, shows your average over two to three months and is also reported two ways: in mmol/mol (the international IFCC unit) or in % (the older NGSP/DCCT unit).
One mole of glucose (C₆H₁₂O₆) weighs 180.156 g, from the standard atomic weights of carbon, hydrogen and oxygen, so mg/dL = mmol/L × 18.0156. For example, 5.5 mmol/L × 18.0156 ≈ 99 mg/dL. For HbA1c the NGSP master equation applies: % = 0.09148 × mmol/mol + 2.152, so 48 mmol/mol is 6.5 %. The estimated average glucose comes from the international ADAG study: eAG (mg/dL) = 28.7 × HbA1c (%) − 46.7, so 6.5 % corresponds to about 140 mg/dL, or 7.8 mmol/L.
The conversions of units are exact; the average glucose is a population estimate that can differ for you. The converter does not judge whether a value is normal or high: that depends on when it was measured and on your situation, so ask your doctor.
Sources
- CIAAW: Abridged standard atomic weightsUsed for: constants
- NGSP: IFCC Standardization of HbA1cUsed for: formula
- NIDDK: The A1C test and diabetes
Frequently asked questions
Why do some countries use mg/dL and others mmol/L?
The United States and several European countries kept the older mass unit, mg/dL, while the United Kingdom, the Nordic countries, Canada and many others use the SI unit mmol/L. The glucose is the same; only the unit differs.
Why do some converters use 18 instead of 18.0156?
18 is a rounded factor. The exact one follows from the molar mass of glucose, 180.156 g/mol. The difference is under 0.1 %, so in practice it changes a result by at most one in the last digit.
Is HbA1c in % the same as a glucose percentage?
No. HbA1c in % is the share of your haemoglobin that has glucose attached. It is a different measure from blood glucose, which is why it needs its own conversion to an estimated average glucose.
Can I convert a glucose reading directly into HbA1c?
No. A single glucose reading and HbA1c measure different things. The HbA1c mode estimates average glucose, not HbA1c from one meter reading.
Do I need to know whether the reading was fasting?
Not for the unit conversion. Fasting status matters when interpreting a result, but does not change the conversion factor.
How can I tell which unit a number is in?
Check the meter or the lab report, because the same number means very different things: 10 mmol/L is 180 mg/dL, while 10 mg/dL would be only 0.56 mmol/L. For HbA1c, 6.5 can only be % (mmol/mol results start at 9 here), but a value such as 15 fits both: 15 mmol/mol is 3.5 %, and 15 % is 140 mmol/mol.
Why doesn't my estimated average glucose match my meter readings?
The estimate is a long-term average over two to three months, so it will not match any single day's readings. It comes from a study table covering HbA1c of 5 to 12 %; outside that range it is extended by the same formula and is less certain.
When can an HbA1c result be misleading?
NIDDK lists conditions that change how long red blood cells live, such as recent blood loss, very low iron, which can give a falsely high result, kidney failure and liver disease. Some haemoglobin variants make the test unreliable. The conversion is still exact; it is the measurement itself that can be off, so ask your doctor.
Next you might need
More in Health & fitness
- Blood alcohol calculator, private, runs on your device
- Daily water intake calculator, private, runs on your device
- Hearing range test, private, runs on your device
- Hiking time calculator, private, runs on your device
- Ideal weight calculator, private, runs on your device
- Macro calculator, private, runs on your device





