When do I need to leave to get there on time?
The latest time to set off: your arrival time minus the journey, the stops on the way and a safety margin, also across time zones.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Arrive by
Stops, date and time zones
Fuel, food, rest or changing trains.
Leave empty for today.
Leave by
Time to allow
The latest time to set off: your arrival time minus the journey, the stops on the way and a safety margin, also across time zones.
How to use
- Type the time you need to be there, such as 09:00 for a meeting or the check-in deadline for a flight.
- Enter how long the journey takes and how much margin you want for traffic or parking.
- Add breaks for long drives, the date if it is not today, and the time zones if you cross one.
- Read the latest time to leave; the list shows how the time adds up.
Arrive by 09:00: no stops, 15-minute margin, same time zone
How it works
The latest time to leave is found by counting backwards from the time you must arrive. Everything that takes time on the way is taken off: the journey itself, any stops, and a margin for the things that go wrong.
In short: leave by = arrival time − (journey + breaks + margin). For example, to be at the airport by 09:00 with a 1 hour 20 minute drive, a 10-minute coffee stop and a 20-minute margin, you leave by 09:00 − 1 h 50 min = 07:10. If you start in another time zone, the same moment is read on your own clock, so a trip from Helsinki to Stockholm by 10:00 Swedish time means leaving by the Finnish clock an hour later than the sum alone suggests.
The result is only as good as the travel time you give it: route planners, timetables and your own experience are the best guide. Time zones and daylight saving changes come from the IANA time zone database in your browser.
Worked example
When must you leave to arrive by 06:00 on 29 March 2026 in Helsinki, the night the clocks go forward, if the drive takes 3 hrs?
- Plain clock arithmetic gives 06:00 − 3 hrs = 03:00.
- But one clock hour is skipped during the night, so the drive starts an hour earlier on the clock than that.
Leave by 02:00. In autumn, when the clocks go back, the same drive starts an hour later than the sum suggests.
Sources
- GOV.UK: The Highway Code, rule 91 (driving when tired)
- IANA: Time Zone DatabaseUsed for: reference data
Frequently asked questions
How much margin should I add?
A common rule of thumb is 10–20 % of the travel time, more for rush hour, bad weather or anything with a fixed deadline such as a flight or an exam.
How long before a flight should I be at the airport?
Airlines usually recommend about 2 hours before a flight within Europe and 3 hours before a long-haul flight. Use that time as the arrival time here.
How often should I take a break on a long drive?
The UK Highway Code recommends a break of at least 15 minutes after every two hours of driving, and advises against long drives between midnight and 6 am. Add the breaks here so they are counted in the time to leave.
Can the departure fall on the previous day?
Yes. If the total time exceeds the time available since midnight, the result shows an earlier date.
Does the tool check live traffic?
No. Enter the journey time yourself and add a margin for possible delays.
What if I need to arrive at a time that does not exist?
On the night the clocks go forward, an hour is skipped: in Helsinki on 29 March 2026 the clock jumps from 03:00 straight to 04:00. The tool says so and reads such a time with the offset from before the change; check the time you were given.
Do I need breaks and margin for a flight or a train?
Use the margin for what happens before you board: for a flight, take the airline's check-in or bag-drop deadline as the arrival time and the drive to the airport as the journey. Breaks are for long drives you do yourself.





