How many SMS messages will your text take?
Characters, encoding and message parts, counted the way phone networks do.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
SMS parts
No text yet
Type or paste a message. 160 GSM-7 characters fit in one SMS.
Count details
- Encoding
- GSM-7
- Characters
- 0
- Septets used
- 0
- Units per part
- 160
- Characters counted twice
- 0
Your text stays on this device and never enters the page address.
Limits per message
- GSM-7
- 160 alone, 153 per part of a longer message
- UCS-2
- 70 alone, 67 per part of a longer message
- Count twice in GSM-7
- ^ { } \ [ ~ ] | €
Characters, encoding and message parts, counted the way phone networks do.
How to use
- Type or paste your message.
- Read how many SMS parts it takes and which encoding it needs.
- Check the details for characters that count twice or force UCS-2.
How it works
An SMS carries 140 bytes. Phone networks pack plain text into the GSM 7-bit alphabet, so one message holds 160 characters. A few symbols (^ { } \ [ ~ ] | and €) live in an extension table and take two of those 7-bit units each.
A single character outside that alphabet, such as an emoji, a curly quote or a Cyrillic letter, switches the whole message to UCS-2, which uses 16 bits per unit: then one message holds only 70. An emoji and some rarer characters take two units. A longer text is sent in parts, and each part spends 6 bytes on a header that lets the phone join them, so a part holds 153 GSM-7 units or 67 UCS-2 units. A character is never split between two parts.
The rules come from the 3GPP specifications TS 23.038 (alphabets): https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=745 and TS 23.040 (message parts): https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=747. Some phones replace characters before sending or use national shift tables (for example Turkish or Portuguese), and operators bill each part, so the count can differ slightly from what a particular phone shows.
Worked example
How many parts does a text of 155 plain letters take?
- Plain letters are GSM-7, one unit each: 155 of 160, so one SMS.
- Adding three euro signs adds six units: 161 is over 160, so it is sent as 2 parts of up to 153.
- Adding one emoji instead switches to UCS-2: 157 units in parts of 67 make 3 parts.
One SMS as plain text, 2 with three euro signs and 3 with one emoji.
Sources
- 3GPP: TS 23.038, Alphabets and language-specific informationUsed for: definitions, limits and cut-offs
- 3GPP: TS 23.040, Technical realization of the Short Message Service (SMS)Used for: definitions, limits and cut-offs
Frequently asked questions
Why did my message suddenly take three parts?
One character outside the GSM-7 alphabet, often an emoji or a curly apostrophe, switches the whole message to UCS-2, where a part holds 67 instead of 153.
Are Finnish, Swedish and German letters safe?
Ä, ö, å, ü and ß are in the GSM-7 alphabet. Letters such as š, ž or õ are not, so they switch the message to UCS-2.
Why does the euro sign count twice?
It is in the GSM-7 extension table, sent as an escape code plus the character, so it takes two units.
Is my text sent anywhere?
No. It is counted on this device and never enters the page address or a shared link.
Do spaces and line breaks count toward the SMS limit?
Yes. Each space and each line-feed character uses one unit; a pasted line ending containing both a carriage return and a line feed uses two.





