How much power does an 11 kW charger deliver?
A three-phase 16 A charger gives 11 kW. See how long your car takes to charge.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
More options
Charging power
11 kW
Adds about 11 kWh per hour. 40 kWh takes 3 hours, 37 minutes.
Formula
3 × 230 V × 16 A = 11.04 kW. A qualified electrician decides the installation, cable and fuses.
A three-phase 16 A charger gives 11 kW. See how long your car takes to charge.
How to use
- The circuit is set to three phases, 16 A and 230 V, the usual 11 kW home charger. Enter the energy you want to add.
- Read the time. If your car's onboard charger takes less than 11 kW, enter its limit under More options.
Charging time on a three-phase 16 A circuit, by what the car accepts
| Energy (kWh) | Full 11 kW | Car limited to 7.4 kW | Car limited to 3.7 kW |
|---|---|---|---|
| 10 | 54 mins | 1 hr, 21 mins | 2 hrs, 42 mins |
| 20 | 1 hr, 49 mins | 2 hrs, 42 mins | 5 hrs, 24 mins |
| 40 | 3 hrs, 37 mins | 5 hrs, 24 mins | 10 hrs, 49 mins |
| 60 | 5 hrs, 26 mins | 8 hrs, 6 mins | 16 hrs, 13 mins |
| 80 | 7 hrs, 15 mins | 10 hrs, 49 mins | 21 hrs, 37 mins |
Ideal values without charging losses or tapering near a full battery.
How it works
An 11 kW home charger is a three-phase circuit set to 16 A per phase: 3 × 230 V × 16 A = 11,040 W. The 11 kW name is a rounding of 11.04. A single-phase supply cannot deliver it, so the house needs a three-phase connection. At that power the circuit adds about 11 kWh each hour, so the energy you want divided by 11.04 gives the hours.
The car decides how much of that power it takes. A car with a 7.4 kW onboard charger, or 3.7 kW, charges at that rate on an 11 kW wallbox, and the table shows how much longer that takes. Charging also usually slows near a full battery, which the ideal times do not include.
This is a calculation, not an electrical design. The house's main fuse, the cable, other loads and load management decide how much current you may draw, and a qualified electrician has to size and approve the installation.
Worked example
How long does it take to charge a 64 kWh battery from 20% to 80% on an 11 kW charger?
- Energy to add: 64 kWh × (80% − 20%) = 38.4 kWh.
- Charging power on the circuit: 3 × 230 V × 16 A = 11.04 kW.
- 38.4 kWh ÷ 11.04 kW = 3 hrs, 29 mins.
3 hrs, 29 mins, if the car accepts the full power.
Sources
- Australian Government: EV charging equipment and AC/DC conversionUsed for: formula
- Australian Government: home charging and electrical installationUsed for: formula
- SESKO: AC charging power and onboard charger limitsUsed for: formula
Frequently asked questions
How long does an 11 kW charger take?
It adds about 11 kWh per hour, so a 60 kWh battery from empty takes about 5.5 hours. The car's onboard charger must accept 11 kW.
Why is 11 kW really 11.04 kW?
Three phases at 230 V and 16 A give 3 × 230 × 16 = 11,040 W. It is called 11 kW for short.
Do I need a three-phase supply for an 11 kW charger?
Yes. One phase at 230 V and 16 A carries only 3.68 kW; the 11 kW comes from three phases in parallel.
How much range does an hour at 11 kW add?
11 kWh divided by the car's consumption. At an assumed 18 kWh per 100 km, one hour adds about 61 km.
Next you might need
More in Vehicles
- AdBlue use calculator, private, runs on your device
- Average speed calculator, private, runs on your device
- Battery percent to kWh and km, private, runs on your device
- Compression ratio calculator, private, runs on your device
- Crash energy calculator, private, runs on your device
- Dashboard warning lights, private, runs on your device





