What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Power
104.7 kW
A torque of 200 N·m (147.5 lbf·ft) at 5,000 rpm corresponds to a power of 104.7 kW (140.4 hp).
- In kilowatts
- 104.7 kW
- In horsepower (hp)
- 140.4 hp
- In metric horsepower (PS)
- 142.4 PS
- Angular speed
- 523.6 rad/s
Power, torque and rpm from any two of them, in kW, horsepower, N·m and pound-feet.
How to use
- Under Find, choose what you want to know: the power, the torque or the engine speed.
- Enter the other two values, for example a torque of 200 N·m at 5 000 rpm. Pick kW, hp or PS and N·m or lb·ft in More options.
- Read the answer in several units at once, including kilowatts, both kinds of horsepower and the angular speed.
Torque needed for 100 kW at different engine speeds
| Engine speed (rpm) | Torque (N·m) | Torque (lb·ft) |
|---|---|---|
| 1,500 | 637 | 470 |
| 2,000 | 477 | 352 |
| 3,000 | 318 | 235 |
| 4,000 | 239 | 176 |
| 5,000 | 191 | 141 |
| 6,000 | 159 | 117 |
| 7,000 | 136 | 101 |
| 8,000 | 119 | 88 |
Torque = power ÷ angular speed; the lower the revs, the more torque the same power needs.
How it works
Torque is the twisting force an engine or motor puts on its shaft; power is how fast it does work. A shaft that turns faster with the same torque delivers more power, which is why a small engine that revs high can be as strong as a big one that turns slowly. Torque alone, or rpm alone, says little: it is the product that counts.
The relation is P = T × ω, where P is power in watts, T torque in newton metres and ω the angular speed in radians per second. One revolution is 2π radians, so ω = 2π × rpm ÷ 60 and P = T × 2π × rpm ÷ 60. A torque of 200 N·m at 5 000 rpm gives ω = 523.6 rad/s and P = 104.7 kW, which is 140.4 horsepower. In US units, hp = lb·ft × rpm ÷ 5252, so the power and torque curves of a dyno chart always cross at 5 252 rpm.
The figures are for the shaft where the torque is measured, usually the crankshaft; wheel power is lower because of drivetrain losses. Horsepower here is the mechanical hp (745.7 W); metric horsepower (PS) is 735.5 W. Based on OpenStax University Physics, volume 1, section 10.8.
Frequently asked questions
How do I convert torque to horsepower?
Multiply torque by rpm and divide: in pound-feet, hp = lb·ft × rpm ÷ 5252. In newton metres, kW = N·m × rpm ÷ 9549. The calculator does both at once.
Why do the power and torque curves cross at 5252 rpm?
Because of the units. With torque in lb·ft and power in hp the two numbers are equal at 5 252 rpm, so every chart in those units crosses there, whatever the engine.
What is the difference between hp and PS?
Mechanical horsepower (hp) is 745.7 watts, metric horsepower (PS, hk, CV) is 735.5 watts. The difference is about 1.4 percent, so a 100 PS engine is 98.6 hp.
Is more torque or more power better?
Torque gets you moving and pulling, power sets how fast you can keep going. Gearing connects them, so the same power can give a lot of torque at the wheels in a low gear.
Is this the engine power or the power at the wheels?
It is whatever the torque you enter refers to. Engine figures are measured at the crankshaft; at the wheels you lose about 10 to 20 percent in the gearbox and axle.
Next you might need
More in Vehicles
- AdBlue use calculator, private, runs on your device
- Average speed calculator, private, runs on your device
- Battery percent to kWh and km, private, runs on your device
- Crash energy calculator, private, runs on your device
- Dashboard warning lights, private, runs on your device
- Fuel cost calculator, private, runs on your device





