Skip to content

How far will your e-bike go on one charge?

Estimate the range of an e-bike or e-scooter from battery watt-hours and consumption.

Battery given as
Wh

%

Range

38 km

500 Wh of battery, 450 Wh of it usable (90%), at 12 Wh/km. That is about 23 mi.

Estimate the range of an e-bike or e-scooter from battery watt-hours and consumption.

How to use

  1. Enter the battery energy in Wh, or choose volts and amp-hours if that is what the label shows.
  2. Enter the consumption of your bike in the unit you know, for example 12 Wh/km. Your display or a few real rides tell you the average.
  3. Adjust the share of the battery you plan to use, and copy the link to share the estimate.

How it works

A battery stores energy, and the bike uses some of it for every kilometre. The range is the energy you can use divided by the energy used per kilometre. It is the same idea as an electric car's range, at a much smaller scale.

The battery energy in watt-hours is its voltage times its capacity: Wh = V × Ah, so a 36 V, 14 Ah battery holds 504 Wh. Range = Wh × usable share ÷ Wh per km. A 500 Wh battery, 90 % of it used, at 12 Wh/km gives 450 ÷ 12 = 37.5 km. Consumption in miles per kWh or Wh per mile is converted first, with the exact length of the mile.

Consumption is what really decides the range, and it varies a lot with assist level, rider and cargo weight, hills, headwind, tyre pressure and temperature. Cold also reduces what a battery can deliver, and batteries lose capacity as they age. Use your own recent average rather than a brochure figure, and keep a margin.

Worked example

How far does a 500 Wh battery go at 12 Wh/km if 90% of it is usable?

  1. Usable energy: 500 × 90% = 450 Wh.
  2. Range = usable energy ÷ consumption = 450 ÷ 12.

About 37.5 km.

Method

No outside data is used: the result is worked out directly from the formula Wh = V × Ah, explained under How it works.

Sources and methods

Frequently asked questions

Should I enter the motor wattage as battery capacity?

No. Motor watts describe power, while battery watt-hours describe stored energy. Use the battery label’s Wh value, or its nominal voltage and amp-hour capacity.

What consumption should I enter?

Use your own average. Low assist on flat ground can use under 8 Wh/km, strong assist uphill or with a load several times that. A display that shows the remaining range gives a hint.

How do I include a second battery?

Add the watt-hours of both batteries if both will be available for the trip, then enter the total in Wh mode. Use a usable share that accounts for their charge levels and the reserve you want to keep.

Is this the same for an e-scooter?

Yes. The method is the same: usable battery energy divided by consumption. Scooters often use somewhat more energy per kilometre at their higher speed.

Can I estimate a trip starting with a partly charged battery?

Yes. Set the usable share to the part of the full battery you plan to spend: starting at 60% and keeping 10% in reserve means using 50%. The estimate still depends on the battery’s actual capacity.

Send feedback