Skip to content

How strong will your homebrew be?

Alcohol by volume of beer, wine, cider or mead from the gravity readings before and after.

Alcohol by volume

5.25%

Hall formula: 5.34%. Apparent attenuation 80%.

Alcohol by volume of beer, wine, cider or mead from the gravity readings before and after.

How to use

  1. Measure the original gravity (OG) with a hydrometer or refractometer before you add the yeast, and note it down.
  2. When fermentation has finished, measure the final gravity (FG) and enter both readings as specific gravity, for example 1.050 and 1.010.
  3. Read the alcohol by volume. The other formula is shown below the answer so you can compare. Copy the link to keep the result.

How it works

Yeast turns sugar into alcohol and carbon dioxide, and as the sugar disappears the liquid becomes less dense. The drop in density between the start (original gravity) and the end (final gravity) therefore tells how much alcohol was made.

The common homebrewing rule is ABV = (OG − FG) × 131.25. For a beer that starts at 1.050 and finishes at 1.010: (1.050 − 1.010) × 131.25 = 5.25 %. An alternate formula, published by Michael L. Hall in Zymurgy in 1995, is ABV = 76.08 × (OG − FG) ÷ (1.775 − OG) × (FG ÷ 0.794); it gives 5.34 % for the same beer. Both are given by the Brewer's Friend ABV calculator page, which gives the first as the usual formula.

The two agree within a few tenths of a percent for ordinary beers and drift apart for strong ones, and neither is exact. Hydrometers are calibrated for one temperature, so correct a warm reading or cool the sample first, and remember that a refractometer reading after fermentation needs its own correction because alcohol bends light too. Apparent attenuation, (OG − FG) ÷ (OG − 1), shows how much of the sugar was used.

Worked example

What is the alcohol by volume of a beer with an original gravity of 1.050 and a final gravity of 1.010?

  1. Gravity drop: 1.050 − 1.010 = 0.040.
  2. ABV ≈ drop × 131.25 = 5.3%.

About 5.3% alcohol by volume; the yeast used 80% of the sugars.

Frequently asked questions

Can I estimate ABV without the original gravity?

Not from final gravity alone. You need an original reading or a separate estimate based on the recipe; this tool does not reconstruct it.

Which formula should I use?

The simple formula is a common starting point for homebrewing. Compare Hall’s estimate too, especially for stronger brews, but neither result is a laboratory measurement.

Can the final gravity be below 1.000?

Yes. Alcohol lowers density, so a fermented drink can be less dense than water. The calculator accepts final gravity down to 0.980.

Does apparent attenuation measure the exact fraction of sugar consumed?

No. Alcohol itself lowers the gravity reading, so apparent attenuation differs from the actual reduction in extract.

Can I enter Plato or Brix readings?

Not directly: the fields require specific gravity. Convert the readings first, and correct post-fermentation refractometer readings for alcohol before using them.

Send feedback