Skip to content

How much stock solution do you need?

Solve C₁V₁ = C₂V₂ for the stock volume, a concentration or the final volume.

%

Stock volume (V₁)

50 mL

Take 50 mL of stock at 10%, add 450 mL of solvent and you have 500 mL at 1%, a 10-fold dilution.

Solve C₁V₁ = C₂V₂ for the stock volume, a concentration or the final volume.

How to use

  1. Choose the quantity to find: the stock volume, the stock or final concentration, or the final volume.
  2. Enter the other three. Both concentrations share one unit (percent by default); change it, or the unit of the volumes, with the unit menu beside each field.
  3. Read the answer and how much solvent to add. Copy the link to share the recipe.

How it works

Adding solvent to a solution makes it weaker but does not change how much solute it holds. So the amount of solute before and after is the same, and that amount is the concentration times the volume.

That gives the dilution equation C₁ × V₁ = C₂ × V₂, where C₁ and V₁ are the concentration and volume of the stock and C₂ and V₂ those of the diluted solution. Diluting 100 mL of 2.0 M hydrochloric acid to 500 mL gives C₂ = 2.0 × 100 ÷ 500 = 0.40 M, and you add 400 mL of water. Any unit works as long as both concentrations share one unit and both volumes another.

The equation assumes the volumes simply add up and that nothing reacts. Strong acids, alcohol and some salts shrink or heat when mixed with water, so for exact work, and always for hazardous chemicals, follow the lab procedure: make up to the final volume in a volumetric flask and add acid to water, never the reverse. Source: LibreTexts Chemistry, Solution Dilution.

Worked example

How much 10% stock is needed to make 500 ml of a 1% solution?

  1. C₁V₁ = C₂V₂, so V₁ = C₂ × V₂ ÷ C₁ = 1% × 500 ÷ 10% = 50 ml.
  2. Solvent to add: V₂ − V₁ = 500 − 50 = 450 ml.

Take 50 ml of stock and add 450 ml of solvent.

Frequently asked questions

How do I dilute a solution 1 to 10?

A 1 to 10 dilution means one part of stock plus nine parts of solvent, a ten-fold dilution. Choose to find V₁ and set C₂ to a tenth of C₁: the answer is a tenth of the final volume.

What is the dilution factor?

The ratio C₁ ÷ C₂, which equals V₂ ÷ V₁. A factor of 10 means the diluted solution is ten times weaker and ten times larger in volume than the stock taken.

Does “make up to 500 mL” mean add 500 mL of solvent?

No. It means the total solution volume should be 500 mL, including the stock you started with. Follow the mixing procedure for the substance before adjusting to the final volume.

Can I mix mol/L and mmol/L in the concentration fields?

Convert both concentrations to the same unit first: 1 mol/L is 1000 mmol/L. The selected unit labels both fields; it does not convert differently scaled input values.

How do I calculate a serial dilution?

Calculate each step separately, using the previous step’s final concentration as the next stock concentration. Multiply the individual dilution factors to get the overall factor.

Send feedback