How long is that in other units?
Convert between metric and imperial lengths, exactly.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Result
3.281 ft
1 metre is about 3.281 feet
- Exact by definition: 1 ft = 0.3048 m.
In all units
- Millimetres
- 1,000 mm
- Centimetres
- 100 cm
- Metres
- 1 m
- Kilometres
- 0.001 km
- Inches
- 39.37 in
- Feet
- 3.281 ft
- Yards
- 1.094 yd
- Miles
- 0.0006214 mi
- Nautical miles
- 0.00054 nmi
Length
Convert between metric and imperial lengths, exactly.
How to use
- Type the value you want to convert.
- Choose the units to convert from and to. Use the swap button to flip them.
Heights in centimetres
How it works
Every unit is converted through metres using exact definitions: 1 inch is exactly 2.54 cm, 1 foot is 0.3048 m, 1 mile is 1,609.344 m and 1 nautical mile is 1,852 m. For example, 5 ft 10 in is 70 inches, and 70 × 2.54 = 177.8 cm.
These definitions come from the International Yard and Pound Agreement of 1959 and the international definition of the nautical mile.
Because the factors are exact, the only rounding is in the display: the result keeps two more significant digits than you typed, between four and six, and is marked when it is rounded. So 1 km shows as 0.6214 miles, while the exact value is 0.621371… miles.
Worked example
How far off is the quick “miles × 1.6” rule over 100 miles?
- Exact: 100 × 1.609344 = 160.9344 km.
- Rule of thumb: 100 × 1.6 = 160 km.
The shortcut comes up 934 m short, 0.58% of the distance: fine for a run, noticeable on a road trip.
Frequently asked questions
Why is an inch exactly 2.54 cm?
Since 1959 the inch has been defined as exactly 25.4 millimetres by international agreement, so conversions between metric and imperial lengths are exact.
What is the difference between a mile and a nautical mile?
A statute mile is 1,609.344 m. A nautical mile, used at sea and in aviation, is 1,852 m — about 1.15 statute miles.
Is the US survey foot supported?
No. The US survey foot (1200/3937 m) was retired at the end of 2022; the international foot (0.3048 m) is used. The two differ by about 3.2 mm per mile, which matters only for old land surveys.
Can I type 5.10 for 5 feet 10 inches?
No, and it is the most common slip: 5.10 ft means 5.1 feet, which is 5 ft 1.2 in or 155.4 cm, not 177.8 cm. Convert the height to inches first (5 × 12 + 10 = 70 in) and convert those.
How do I convert feet and inches to centimetres?
Turn the height into inches first, then multiply by 2.54: 5 ft 10 in is 5 × 12 + 10 = 70 in, and 70 × 2.54 = 177.8 cm.
How many miles is a kilometre?
About 0.621 miles. A 10 km run is 6.2 miles, and a marathon (42.195 km) is 26.2 miles.
How many feet are in a metre?
3.28084 feet, or 3 ft 3.37 in.





