How big can you print your photo?
Turn pixels into centimetres or inches at your DPI, or find the pixels a print needs.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Print size
25.4 × 16.9 cm
The image prints this large at 300 dots per inch.
- Same size in inches
- 10 × 6.7 in
- Megapixels
- 6
Formula
Print size = pixels ÷ dpi
Turn pixels into centimetres or inches at your DPI, or find the pixels a print needs.
How to use
- Choose whether to find the print size of your image or the pixels a print needs.
- Enter the image size in pixels (or the print size you want) and the resolution, 300 dpi for a sharp photo print.
- Read the result and the same size in the other unit. Copy the link to share it.
How it works
A printer lays down a fixed number of dots per inch. The more pixels your image has, the larger it can print before the dots get so spread out that the picture looks soft. A photo for a sharp print needs about 300 dots per inch; posters seen from a distance get by with less.
Print size in inches = pixels ÷ dpi, and pixels needed = print size in inches × dpi, with 1 inch = 2.54 cm exactly. Example: a 3000 × 2000 px photo at 300 dpi prints 10 × 6.67 in, or 25.4 × 16.9 cm. A full A4 page (21 × 29.7 cm) at 300 dpi needs 2,481 × 3,508 pixels.
The dpi number is a guideline, not a law: viewing distance, paper and the printer decide how sharp a print looks. Resizing the image in software does not add detail.
Worked example
How large can a 3,000 × 2,000 pixel photo be printed at 300 dpi?
- Width: 3,000 ÷ 300 = 10 in; height: 2,000 ÷ 300 = 6.67 in.
- In centimetres (× 2.54): 25.4 × 16.9 cm.
25.4 × 16.9 cm at 300 dpi.
Sources
- BIPM: The International System of Units (SI Brochure)Used for: constants
- NIST SP 811: Guide for the Use of the SIUsed for: constants
Frequently asked questions
What resolution should I use?
Around 300 image pixels per inch is a common target for prints viewed closely. A large print viewed from farther away may look good at a lower resolution.
Does this include bleed?
No. Add the printer’s required bleed to each edge of the desired size before calculating the pixels needed.
What is the difference between dpi and ppi?
PPI measures image pixels per inch; DPI measures printer dots per inch. This tool’s dpi field means image resolution, so do not enter the printer’s much higher hardware dot rating.
Can I print my image larger than the result?
Yes, at a lower image resolution. Lower the dpi value here to see the larger size at the same pixel count.
Will the image fit a different-shaped frame without cropping?
Only if the aspect ratios match. Otherwise you must crop, leave borders or distort the image; this tool does not choose a crop.





