Skip to content

How many foot-candles is a lux reading?

Multiply lux by 0.0929 to get foot-candles, or enter any reading.

Result

9.290304 fc

100 lux equals 9.290304 foot-candles

  • The other way round: 1 fc ≈ 10.76 lx.

In all units

Lux
100 lx
Foot-candles
9.290304 fc
Phots
0.01 ph

Multiply lux by 0.0929 to get foot-candles, or enter any reading.

How to use

  1. Type the light level in lux, as a light meter or lighting plan gives it.
  2. Read the foot-candles, and compare with the shortcut column in the table below.

Lux in foot-candles, exact and by the shortcut

LuxFoot-candlesLux ÷ 10 (shortcut)
100.91
504.65
1009.310
30027.930
50046.550
75069.775
1,00092.9100

The shortcut overstates the exact value by about 8 %.

How it works

A foot-candle is one lumen per square foot and a lux is one lumen per square metre. Because a foot is 0.3048 metres, 1 foot-candle is 1 ÷ 0.3048² = 10.7639 lux, and lux to foot-candles is a division by that number: 500 lux is 46.45 fc. Light meters and phone apps often show lux, while US lighting tables and specifications give foot-candles, so this is the direction you usually need when checking a measured reading against a US requirement.

The shortcut "divide by 10" is common, but it reads about 8 per cent too high: 500 lux is not 50 fc. The table shows both side by side. For a lighting plan or a compliance check, use the exact factor.

This page converts illuminance only. A lumen rating describes a lamp, not the light that lands on a surface, so it cannot be turned into lux without the area it covers.

Worked example

How many foot-candles is 500 lx?

  1. One foot-candle is 10.7639 lux (1 ÷ 0.3048²).
  2. 500 lx ÷ 10.7639 = 46.45 fc

500 lx is 46.45 fc.

Frequently asked questions

How many foot-candles is 1,000 lux?

About 92.9 foot-candles.

Is a foot-candle the same as a lumen per square foot?

Yes. That is its definition, in the same way a lux is a lumen per square metre.

Can I convert lumens to foot-candles?

Not directly. Divide the lumens by the area they cover in square feet, and assume the light spreads evenly, to get an estimate.

Which unit do US documents use?

Foot-candles, as in OSHA's table of minimum illumination for construction work. Most lighting software and European documents use lux.

Send feedback