Skip to content

How many megabytes per second is my Mbps?

Divide megabits per second by 8 to get megabytes per second, or enter any speed.

Result

12.5 MB/s

100 megabits per second equals 12.5 megabytes per second

  • The other way round: 1 MB/s = 8 Mbit/s.
  • Exact by definition: 1 MB/s = 8,000,000 bit/s.

In all units

Bits per second
100,000,000 bit/s
Kilobits per second
100,000 kbit/s
Megabits per second
100 Mbit/s
Gigabits per second
0.1 Gbit/s
Bytes per second
12,500,000 B/s
Kilobytes per second
12,500 kB/s
Megabytes per second
12.5 MB/s
Gigabytes per second
0.0125 GB/s
Kibibytes per second
12,210 KiB/s
Mebibytes per second
11.92 MiB/s

Divide megabits per second by 8 to get megabytes per second, or enter any speed.

How to use

  1. Enter the speed your provider quotes, in Mbps (megabits per second).
  2. Read the MB/s figure: that is the most a download can show in your browser or file manager.
  3. Choose another target unit if you need MiB/s or kB/s instead.

Common plan speeds in MB/s

Plan speedDownload ceiling
10 Mbit/s1.25 MB/s
25 Mbit/s3.125 MB/s
50 Mbit/s6.25 MB/s
100 Mbit/s12.5 MB/s
300 Mbit/s37.5 MB/s
500 Mbit/s62.5 MB/s
1,000 Mbit/s125 MB/s

Raw line speed; real downloads are somewhat lower.

How it works

Internet plans are advertised in megabits, but a browser's download window counts megabytes. Eight bits make one byte, so the number in MB/s is the plan speed divided by 8.

That makes the figure on the box look larger than what you see: a plan that advertises 100 Mbps gives at most 12.5 MB/s. The difference is not a loss; it is only a different unit.

Real downloads land below that ceiling. Protocol headers, Wi-Fi quality, the server's own limit and other devices on the line all take a share.

A few common plans in practice: 50 Mbps is 6.25 MB/s, 300 Mbps is 37.5 MB/s and a gigabit line (1,000 Mbps) is 125 MB/s. A 1 GB file, which is 1,000 megabytes, then takes at least 8 seconds on a gigabit line and about 160 seconds on a 50 Mbps one. Remember the direction: to go from megabits to megabytes, divide by 8. The figures here are for the line itself, so they apply the same way to downloads and uploads.

Worked example

What does a plan sold as 100 Mbit/s download at, in megabytes per second?

  1. One megabit per second is 0.125 MB/s.
  2. 100 Mbit/s × 0.125 = 12.5 MB/s

A line sold as 100 Mbit/s can move at most 12.5 MB/s.

Frequently asked questions

Why does my 100 Mbps plan download at about 12 MB/s?

Because 100 Mbps is 12.5 MB/s once the bits are counted as bytes. Seeing 11 to 12 MB/s in a real download means you are getting nearly the full plan.

How many Mbps do I need to download 1 GB in a minute?

1 GB is 8,000 megabits, so about 133 Mbps sustained for 60 seconds, before any overhead.

Is a gigabit plan 125 MB/s?

On paper yes: 1,000 Mbps divided by 8 is 125 MB/s. A single drive, Wi-Fi link or server often limits the result well below that.

How long does a 5 GB download take on a 100 Mbps line?

At most 12.5 MB/s, so 5,000 MB ÷ 12.5 = 400 seconds, about 6 minutes 40 seconds, if nothing slows it down. In practice, allow a little longer.

Send feedback