How long will your download take?
Enter the file size and your connection speed to see how long a download or upload takes.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Real-world speed
Download time
2 minutes, 40 seconds
2 GB at 100 Mbit/s takes about 2 minutes, 40 seconds
Behind the time
- Speed after overhead
- 12.5 MB/s
- Total time in seconds
- 160 s
What this means
- Packet headers alone take at least 2.7% of every full-size packet, so real downloads run a little slower than the line speed.
Enter the file size and your connection speed to see how long a download or upload takes.
How to use
- Type the file size and pick its unit, such as 2 GB.
- Type your connection speed and pick its unit. Providers quote Mbit/s; download programs often show MB/s.
- Optionally set a percentage for overhead to see a more realistic time.
Download time by connection speed
At the full line speed, with no overhead; real downloads take at least 2.7 % longer.
How it works
A download takes the amount of data divided by how much your connection moves per second. The catch is the units: files are measured in bytes, but connections are quoted in bits per second. A byte is 8 bits, so a 100 Mbit/s line moves at most 12.5 megabytes each second.
time = size ÷ (speed × (1 − overhead)). For example, a 2 GB film at 100 Mbit/s is 2 GB ÷ 12.5 MB/s = 160 seconds, about 2 min 40 s. Prefixes like GB mean 1,000-based units and GiB 1,024-based units (IEC 80000-13), which is why a GiB file takes about 7 % longer than a GB file.
Real downloads are slower than the line speed. Each full-size packet on Ethernet carries at most 1,500 bytes, of which 40 are the IP and TCP headers (RFC 894, RFC 9293), so headers alone cost at least 2.7 %. Wi-Fi, encryption, a busy server or a shared line cost more, and that varies too much for one figure, so use the overhead box if you know yours.
Worked example
How long does a 50 GiB game take to download at 250 Mbit/s when 10% of the speed is lost on the way?
- Size: 50 GiB = 53,687,091,200 bytes, because a GiB is 1,073,741,824 bytes.
- Speed: 250 Mbit/s ÷ 8 = 31.25 MB/s, and 10% less leaves 28.13 MB/s.
- Time: 53,687,091,200 bytes ÷ 28.13 MB/s = 31 mins, 49 secs.
About 31 mins, 49 secs. Taking the size as 50 GB and ignoring the loss would give 26 mins, 40 secs, 16% too little.
Sources
- IETF RFC 894: A Standard for the Transmission of IP Datagrams over Ethernet NetworksUsed for: limits and cut-offs
- IETF RFC 9293: Transmission Control Protocol (TCP)Used for: limits and cut-offs
Frequently asked questions
Why is my download slower than my advertised speed?
Advertised speeds are bits per second on the line. Headers, encryption, Wi-Fi, a busy server and other devices on your network all take a share. Test your real speed and use that.
How do I convert Mbit/s to MB/s?
Divide by 8. 100 Mbit/s is 12.5 MB/s. A lowercase b means bits and an uppercase B means bytes.
Is it the same for uploads?
Yes, the maths is identical. Use your upload speed, which is often much lower than the download speed.
What is the difference between GB and GiB?
A gigabyte is 1,000,000,000 bytes and a gibibyte is 1,073,741,824 bytes. Drive makers and providers use GB; some operating systems show GiB.
Does this measure my internet speed?
No. It estimates transfer time from the speed you enter. Use a measured speed for a more useful estimate.
Why does my download program show only 11.6 MB/s on a 100 Mbit/s line?
Because that is the full speed. 100 Mbit/s is 12.5 MB/s; after the 2.7 % that packet headers take, 12.17 MB/s are left, and many programs count in MiB (1,048,576 bytes) while writing MB, which makes it 11.6.
How long does a 1 TB backup take?
About 22 hours 13 minutes at 100 Mbit/s and 2 hours 13 minutes at 1 Gbit/s, before any overhead. A cloud backup goes over your upload speed, which is often much lower: at 20 Mbit/s the same terabyte takes more than four and a half days.





