How long should my bracelet or necklace be?
Bracelet length from your wrist, necklace lengths from choker to rope, and how many beads fill the strand.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Measure around the wrist bone with a soft tape or a strip of paper.
Beads and clasp
Clasp and rings; 0 for a stretch bracelet.
Finished length
18.5 cm
Wrist 16.5 cm + 2 cm to fit · 27 beads of 6 mm fill 16.5 cm
Beads
- Wrist
- 16.5 cm
- Strand to fill with beads
- 16.5 cm
- Whole beads
- 27
Bracelet length from your wrist, necklace lengths from choker to rope, and how many beads fill the strand.
How to use
- Choose bracelet or necklace. For a bracelet, enter your wrist measurement and pick a snug, comfortable or loose fit.
- For a necklace, pick the length name (choker, princess, matinee, opera or rope) or enter your own length.
- Under the result, enter the clasp length and the bead size to see how many whole beads fill the strand.
Bracelet length by wrist size and fit
How it works
A bracelet has to be longer than the wrist it goes around, or it would not slide over the hand and sit without pinching. Jewellers commonly add about 1.5 cm (½ in) to the wrist measurement for a snug fit, 2 cm (¾ in) for a comfortable one and 2.5 cm (1 in) for a loose bracelet that moves freely. Measure the wrist with a soft tape or a strip of paper that you then lay flat against a ruler.
Necklace lengths have conventional names that this tool uses: a choker sits close around the neck at about 16 in (41 cm), a princess necklace rests on the collarbone at 18 in (46 cm), a matinee reaches the chest at about 20–24 in (this tool uses 22 in, 56 cm), an opera necklace is about 28–34 in (30 in, 76 cm) and a rope is 36 in (91 cm) or more. Retailers vary a little, so treat the names as a guide. For beading, the clasp takes up part of the length: the strand is the finished length less the clasp, and round beads that touch give ⌊strand ÷ bead size⌋ beads. Example: a 16.5 cm wrist, comfortable, makes an 18.5 cm bracelet; with a 2 cm clasp, 16.5 cm of 6 mm beads is 27 beads.
Real strings need a little more than the beads: knots, crimps and tails, and beads that are not perfectly round or have spacers. Treat the count as a starting point and string a test row.
Method
The result is an estimate based on common rules of thumb, explained under How it works.
Frequently asked questions
How long should a bracelet be for my wrist?
Add about 1.5 cm (½ in) for a snug fit, 2 cm (¾ in) for a comfortable fit or 2.5 cm (1 in) for a loose fit to your wrist circumference. A well-fitting bracelet leaves room for one finger to slide underneath.
How do I measure my wrist for a bracelet?
Wrap a soft measuring tape or a strip of paper around the wrist just above the wrist bone, mark where it meets, and measure the strip against a ruler.
What are the standard necklace lengths?
Choker about 16 in (41 cm), princess 18 in (46 cm), matinee 20–24 in (50–60 cm), opera 28–34 in (70–86 cm) and rope 36 in (91 cm) or longer. The names are conventions and shops differ slightly.
How many beads do I need for a bracelet?
Divide the length the beads fill (the bracelet length less the clasp) by the bead diameter. For 16.5 cm of 6 mm beads that is 27 beads.
Does a stretch bracelet need a clasp allowance?
No: set the clasp to 0. A stretch bracelet that has to roll over the hand is often made slightly shorter than the wrist plus allowance, so choose a snug fit and try one.
Next you might need
More in Arts & crafts
- Brick mosaic maker, private, runs on your device
- Cross-stitch pattern maker, private, runs on your device
- Diamond painting pattern maker, private, runs on your device
- Embroidery thread colour finder, private, runs on your device
- Epoxy resin calculator, private, runs on your device
- Fuse bead pattern maker, private, runs on your device





