Skip to content

How fast is warp 6, and how long to the stars?

Turn a warp factor into multiples of light speed on two fan scales and see the trip to a real star. Fiction, with real distances.

I know the

Travel time to Proxima Centauri

3.95 d

Warp 6 on the later scale is 392.5 × c (117,700,000 km/s). A fictional speed: nothing in physics reaches it.

Key values as a table
Speed ofTimes light speedkm/s
Voyager 10.000056517
Parker Solar Probe0.000641192
Light speed1299,792
Warp 11300,000
Warp 338.9411,700,000
Warp 5213.764,100,000
Warp 7656.1197,000,000
Warp 91,516455,000,000
Speed
392.5 × c
Same speed on the original scale: warp
7.32
Distance
4.247 light-years
The same trip at light speed
4.25 yr

Fan-made fun calculations. Not affiliated with or endorsed by the owners of any film, series or book named here.

Turn a warp factor into multiples of light speed on two fan scales and see the trip to a real star. Fiction, with real distances.

How to use

  1. Pick a warp scale: the later one (warp 10 is infinite speed) or the original cubic one.
  2. Enter a warp factor, or switch to Speed and enter how many times light speed you want, then choose where to go.
  3. Read the travel time, or drag the point on the speed ruler to see where a warp factor sits between real spacecraft and light.

Warp factors on the two fan scales and the trip to Proxima Centauri

Warp factorOriginal scale (× c)Later scale (× c)Later scale: days to Proxima Centauri
1111,550
32738.9439.8
5125213.77.26
7343656.12.36
97291,5161.02

Proxima Centauri is 4.25 light-years away. The later scale is a fit above warp 9.

How it works

Warp factors come from science fiction, not physics: no known law lets anything outrun light. They are a speed number invented for the Star Trek series, and fans have written down two ways to read it. This tool turns a warp factor into a multiple of the speed of light on either scale, then divides a real distance by it. Everything about warp is fiction; the distances to the stars are real.

The original scale is cubic: speed = w³ × c, so warp 2 is 8 × c and warp 9 is 729 × c (Franz Joseph, Star Fleet Technical Manual, 1975). The later scale follows speed = w^(10/3) × c up to warp 9, which is about 1,516 × c, and bends upwards so that warp 10 is infinite speed (Okuda and Sternbach, Star Trek: The Next Generation Technical Manual, 1991). That book gives only a few values above warp 9 (9.9 is 3,053 × c, 9.99 is 7,912 × c), so the curve in between is a fit, and the tool stops at 9.99.

Example: warp 6 on the later scale is 6^(10/3) ≈ 392 × c. Proxima Centauri is 4.25 light-years away, so the trip takes 4.25 / 392 years, about four days. Distances come from astronomy catalogues; the speed itself is the fiction, and different episodes and writers do not always agree with the manuals.

Frequently asked questions

Is faster-than-light travel possible?

As far as we know, no. Relativity says nothing with mass can reach light speed, and warp factors are a made-up scale for fiction. Real spacecraft are far slower: Voyager 1 moves at about 17 km/s, which is 0.006 % of light speed.

Which warp scale should I use?

Use the original cubic scale for the 1960s series and the later scale for the 1987 series and the shows that followed. The two disagree: warp 9 is 729 × c on the first and about 1,516 × c on the second.

Why can't I enter warp 10?

On the later scale warp 10 means infinite speed, so there is no travel time to calculate. The manuals list values up to 9.99, and this tool stops there.

Why is the later scale only a fit above warp 9?

The published manuals give a formula up to warp 9 and then just a few example speeds. The tool draws straight lines through those values on a logarithmic scale; it is a convenient fit, not an official formula.

How long would the Milky Way take to cross?

About 100,000 light-years. At warp 9 on the later scale (about 1,516 × c) that is roughly 66 years; at warp 9.99 about 13 years. Choose the Milky Way as the destination to see it.

Send feedback