Skip to content

How do colours look with colour blindness?

See a photo or your live camera as people with protanopia, deuteranopia, tritanopia or no colour vision see it, next to the original.

Colour vision workspace

Drop or open a picture

Simulating Deuteranopia (no green) Red and green blend
Colour vision

The medium-wavelength (green) cones do not work, so reds, greens and browns blend together. About 1 in 100 men.

About the simulation

A simulation based on a model of the eye, not an exact view: screens, lighting and individual eyes differ, and most people with colour blindness see some colour. It does not replace a test by an eye-care professional.

See a photo or your live camera as people with protanopia, deuteranopia, tritanopia or no colour vision see it, next to the original.

How to use

  1. Choose the kind of colour vision to simulate. Deuteranopia and protanopia are the most common.
  2. Choose a photo, or press Start on the camera, to see it through that colour vision. A photo appears next to the original.
  3. In the Colour vision tab, lower the Severity slider to see a milder deficiency.
  4. Check that your charts, signs and buttons still work when red and green look alike. Do not rely on colour alone.

How it works

People see colour with three types of cone cells in the retina, sensitive to long (red), medium (green) and short (blue) wavelengths. In colour blindness one type is weak or missing. About 1 in 12 men and 1 in 200 women have a red-green deficiency, so a red-green chart or status light is a problem for a surprising number of people.

The simulation turns each colour into linear light and multiplies it by a 3 × 3 matrix from the model of Machado, Oliveira and Fernandes (2009) for the missing cone type. For deuteranopia, red becomes R′ = 0.367 R + 0.861 G − 0.228 B. For no colour (achromatopsia) every colour becomes its luminance, 0.2126 R + 0.7152 G + 0.0722 B. The severity slider blends the matrix with the unchanged colour.

This is an approximation. Screens and lighting differ, people with the same diagnosis see differently and most have a partial deficiency (anomalous trichromacy) rather than a missing cone, so severity below 100 % is closer to real life. Use it to spot trouble, such as colours that merge or lose contrast, then fix it with labels, patterns or lightness, not by colour alone.

Worked example

How does a pure red #ff0000 look with deuteranopia?

  1. Convert to linear light: red is (1, 0, 0).
  2. Multiply by the deuteranopia matrix: R′ = 0.367 × 1 = 0.367, G′ = 0.280 × 1 = 0.280, B′ = −0.012 × 1, kept at 0.
  3. Convert back to screen values.

#ff0000 looks like #a39000, a dull olive.

Frequently asked questions

How common is colour blindness?

About 1 in 12 men (8 per cent) and 1 in 200 women have a red-green deficiency. Blue-yellow and total colour blindness are rare.

What is the difference between protanopia and deuteranopia?

Both confuse reds and greens. In protanopia the red cones are missing and reds look darker; in deuteranopia the green cones are missing and brightness stays more even.

Is the simulation exact?

No. It is a model: screens, lighting and individuals differ. It is good at showing which colours merge, not at reproducing one person's exact view.

Is my photo uploaded?

No. The picture is read and drawn on your device and is never sent or stored.

How do I make my design work for colour-blind people?

Never use colour alone: add labels, icons or patterns, and keep enough difference in lightness between colours. Check the result here.

Can this tell me whether I am colour blind?

No. It shows how others see; it is not a test. Ask an eye-care professional for a proper colour vision test.

Send feedback