How many ppm is a hardness in °dH?
Multiply °dH by 17.85 to get ppm as CaCO₃, or enter any hardness.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Result
178.5 mg/L CaCO₃
10 German degrees is about 178.5 milligrams of CaCO₃ per litre
- The other way round: 1 mg/L CaCO₃ ≈ 0.05603 °dH.
In all units
- Millimoles per litre
- 1.783 mmol/L
- Milligrams of CaCO₃ per litre
- 178.5 mg/L CaCO₃
- German degrees
- 10 °dH
- French degrees
- 17.85 °fH
- English (Clark) degrees
- 12.52 °e
Multiply °dH by 17.85 to get ppm as CaCO₃, or enter any hardness.
How to use
- Type the hardness in German degrees (°dH).
- Read the ppm, which here means mg per litre as calcium carbonate.
German degrees in ppm (mg/L as calcium carbonate)
| °dH | ppm |
|---|---|
| 1 °dH | 17.85 mg/L CaCO₃ |
| 5 °dH | 89.24 mg/L CaCO₃ |
| 8.4 °dH | 149.9 mg/L CaCO₃ |
| 10 °dH | 178.5 mg/L CaCO₃ |
| 14 °dH | 249.9 mg/L CaCO₃ |
| 20 °dH | 357 mg/L CaCO₃ |
| 30 °dH | 535.4 mg/L CaCO₃ |
Exact definitions; 1 °dH = 17.85 mg/L.
How it works
One German degree is 10 mg of calcium oxide per litre. Expressed as calcium carbonate, the usual basis for ppm, that is 17.85 mg/L, because the two compounds have different molar masses. So °dH to ppm is a multiplication by 17.85, not by 10: 10 °dH is 178.5 ppm.
The USGS sorts water by mg/L as calcium carbonate: soft up to 60, moderately hard up to 120, hard up to 180 and very hard above. In °dH those limits are about 3.4, 6.7 and 10.1.
The ppm here is a hardness, not a salt content. A TDS meter reads all dissolved solids, so its ppm is not a hardness, and a result as calcium alone is a different, smaller number. Check which basis a figure uses before comparing. Going back, divide by 17.85: 100 ppm is 5.6 °dH. Because the ppm here is a mass of calcium carbonate per litre, and a litre of water weighs about a kilogram, mg/L and ppm are used interchangeably.
Worked example
The USGS calls water above 180 mg/L as calcium carbonate very hard. How many °dH is that?
- One °dH is 17.848 mg/L as calcium carbonate.
- 180 mg/L ÷ 17.848 = 10.1 °dH
180 mg/L is 10.1 °dH.
Frequently asked questions
How many ppm is 10 °dH?
About 178.5 ppm as calcium carbonate.
How do I convert ppm to °dH?
Divide by 17.85. For example 120 ppm is about 6.7 °dH.
Can I use a TDS meter to read hardness?
No. A TDS meter measures all dissolved solids, including salts that do not make water hard. Hardness is calcium and magnesium only.
What ppm counts as hard water?
The USGS calls 121 to 180 mg/L hard and anything above 180 very hard, as calcium carbonate. That is about 6.8 to 10.1 °dH, and above.





