Skip to content

How hard is your water in other units?

Convert between German, French and English degrees, mmol/L and mg/L as calcium carbonate.

Result

1.783 mmol/L

10 German degrees is about 1.783 millimoles per litre

  • The other way round: 1 mmol/L = 5.60774 °dH.

In all units

Millimoles per litre
1.783 mmol/L
Milligrams of CaCO₃ per litre
178.5 mg/L CaCO₃
German degrees
10 °dH
French degrees
17.85 °fH
English (Clark) degrees
12.52 °e

Convert between German, French and English degrees, mmol/L and mg/L as calcium carbonate.

How to use

  1. Type the water hardness you want to convert.
  2. Choose the units to convert from and to. Use the swap button to flip them.

Water hardness classes

Class°dHmmol/L
Soft< 8.4< 1.5
Medium8.4–141.5–2.5
Hard> 14> 2.5

Bands of the German detergent law (WRMG); other countries use different bands.

How it works

Water hardness is the amount of dissolved calcium and magnesium. Labs and waterworks state it in different units that describe the same thing: 1 mmol/L (calcium plus magnesium) is 100.086 mg/L as calcium carbonate. A German degree (°dH) is 10 mg calcium oxide per litre, a French degree (°fH) is 10 mg CaCO₃ per litre and an English (Clark) degree is one grain of CaCO₃ per imperial gallon.

So 1 °dH is 17.85 mg/L, 0.1783 mmol/L or 1.785 °fH. Finnish waterworks usually report °dH. The German detergent law (WRMG) calls water soft below 1.5 mmol/L (8.4 °dH), medium up to 2.5 mmol/L (14 °dH) and hard above that.

Some sources round 1 °dH to 0.18 mmol/L; the converter uses the exact definitions. The class limits differ by country, and the table shows the German ones.

Frequently asked questions

How many mmol/L is 1 °dH?

0.1783 mmol/L of calcium plus magnesium, so 10 °dH is about 1.78 mmol/L.

How many ppm is 1 °dH?

17.85 ppm, meaning mg per litre as calcium carbonate.

What is the difference between °dH and °fH?

A German degree is 10 mg calcium oxide per litre and a French degree is 10 mg calcium carbonate per litre. So 1 °dH is 1.785 °fH.

When is water soft or hard?

In the German detergent law: soft below 8.4 °dH (1.5 mmol/L), medium 8.4 to 14 °dH and hard above 14 °dH (2.5 mmol/L). Other countries use different bands.

Where do I find my water hardness?

Your waterworks publishes it, usually as °dH or mmol/L on its water-quality page. This converter changes units; it does not know your supply.

Send feedback