How much downtime does your uptime target allow?
Turn an availability target into the minutes of downtime it allows, or the other way around.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Allowed downtime
8 hours, 45 minutes, 36 seconds per year
A service that works 99.9% of the time may be down this long at most.
- Per month
- 43 minutes, 48 seconds
- Per week
- 10 minutes, 4 seconds
- Per day
- 1 minute, 26 seconds
Formula
Downtime = (100% − 99.9%) × one year
Turn an availability target into the minutes of downtime it allows, or the other way around.
How to use
- Choose what to find: the downtime an availability target allows, or the availability a downtime budget needs.
- Enter the availability in percent (or the allowed minutes) and pick the period, such as a month.
- Read the downtime per year, month, week and day. Copy the link to share it.
Allowed downtime for common availability targets
| Availability | Per year | Per month | Per day |
|---|---|---|---|
| 99% | 3 days, 15 hours, 36 minutes | 7 hours, 18 minutes | 14 minutes, 24 seconds |
| 99.5% | 1 day, 19 hours, 48 minutes | 3 hours, 39 minutes | 7 minutes, 12 seconds |
| 99.9% | 8 hours, 45 minutes, 36 seconds | 43 minutes, 48 seconds | 1 minute, 26 seconds |
| 99.95% | 4 hours, 22 minutes, 48 seconds | 21 minutes, 54 seconds | 43 seconds |
| 99.99% | 52 minutes, 33 seconds | 4 minutes, 22 seconds | 8.6 seconds |
| 99.999% | 5 minutes, 15 seconds | 26 seconds | 0.8 seconds |
A year is 365 days and a month a twelfth of it. Each target opens in the calculator.
How it works
A service's availability is the share of time it works. If a contract promises 99.9%, the other 0.1% of the time it may be down, and that small share adds up to hours over a year. Each extra nine cuts the allowance by a factor of ten.
Availability is uptime ÷ (uptime + downtime) over a period, as defined in Google's SRE Book chapter "Embracing Risk". So allowed downtime = (1 − availability) × period. Example: 99.9% over a year of 365 days leaves 0.001 × 31,536,000 s = 31,536 s, about 8 hours 45 minutes. A month is counted as a twelfth of that year.
Real contracts differ in how they measure: some count only whole minutes, exclude planned maintenance or measure per month in calendar days. Read the SLA's own definition before relying on the figures here.
Sources
- Google SRE Book: Embracing RiskUsed for: formula
Frequently asked questions
How much downtime is 99.9% a month?
About 43 minutes and 48 seconds in an average month, or 8 hours 45 minutes in a year.
What are the nines?
A shorthand for availability: three nines is 99.9%, four nines 99.99%, five nines 99.999%.
Does meeting the yearly target guarantee every month meets it?
No. An outage concentrated in one month can break a monthly target even when the yearly average passes. The period rows show equivalent allowances, not a forecast of when outages occur.
Can this check whether a slow service counts as unavailable?
No. It only converts an availability percentage and a time budget. You need a separate definition of failure, such as a response-time limit, to measure downtime.
Can one long outage use up the whole monthly allowance?
Yes. The calculation limits total downtime, not the length or number of individual outages. A separate recovery-time target is needed to constrain a single outage.





