How many stacked cubic metres is a loose cubic metre?
A loose cubic metre of firewood is about 0.6 stacked m³.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Result
6 m³ stacked
10 loose cubic metres equals 6 stacked cubic metres
- The other way round: 1 m³ stacked ≈ 1.667 m³ loose.
In all units
- Solid cubic metres
- 4 m³ solid
- Stacked cubic metres
- 6 m³ stacked
- Loose cubic metres
- 10 m³ loose
A loose cubic metre of firewood is about 0.6 stacked m³.
How to use
- Enter the loose cubic metres (irtokuutio, also called heittokuutio) from the delivery offer.
- Read the stacked cubic metres (pinokuutio) it corresponds to.
- Compare with the stacked amount your woodshed holds.
Loose cubic metres as stacked cubic metres
| Loose | Stacked |
|---|---|
| 1 m³ loose | 0.6 m³ stacked |
| 2 m³ loose | 1.2 m³ stacked |
| 3 m³ loose | 1.8 m³ stacked |
| 5 m³ loose | 3 m³ stacked |
| 8 m³ loose | 4.8 m³ stacked |
| 10 m³ loose | 6 m³ stacked |
| 15 m³ loose | 9 m³ stacked |
Average ratio; real loads settle differently.
How it works
Loose cubic metres measure split logs thrown into a heap or onto a trailer. Air takes up more of that volume than in a neat pile, so the same wood fills more loose cubic metres than stacked ones.
Taking the average ratio of about 2.5 loose m³ to one solid m³, a loose cubic metre is 0.6 stacked m³. 10 loose m³ make about 6 stacked m³.
This is the step to take when a delivery is sold by the loose measure and your shed is measured by stacked cubes. The result is an estimate: shorter logs settle more densely when they are poured.
The three Finnish firewood measures line up like this on average: 1 solid cubic metre (kiintokuutio) is about 1.5 stacked (pinokuutio) and about 2.5 loose (irtokuutio). Going from loose to stacked divides 1.5 by 2.5, which is where the 0.6 comes from.
Check which measure an offer uses and how long the logs are. Short logs pour and settle tighter than long ones, so ask the seller what the delivered amount will measure when stacked.
Worked example
How many stacked cubic metres will 10 m³ loose fill?
- One loose m³ is 0.6 stacked m³ on the usual averages.
- 10 m³ loose × 0.6 = 6 m³ stacked
10 m³ loose will stack to about 6 m³ stacked.
Frequently asked questions
How many stacked cubic metres is 1 irtokuutio?
About 0.6. One loose cubic metre holds roughly 0.4 solid m³, and one stacked cubic metre roughly 0.67.
What is a heittokuutio?
Another name for a loose cubic metre (irtokuutio): wood thrown loosely into a heap or a trailer.
Will my delivered loose wood fill a shed of the same stacked volume?
Roughly the converted amount, which is smaller than the loose figure. Settling and log size change the result, so leave some margin.
How many solid cubic metres is 1 loose cubic metre?
About 0.4, because it takes about 2.5 loose cubic metres to make one solid cubic metre of wood.
Why is a loose cubic metre less wood than a stacked one?
Thrown wood leaves much more air between the logs than a neat stack does, so the same volume holds fewer logs. That is why the loose figure is the largest for the same amount of wood.





