What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
More options
Heat needed
3,071 kJ
It takes 3,071 kJ, of which 2,590 kJ only melts or boils it: about 25 mins, 35 secs with a 2,000 W heater and no losses.
Key values as a table
| Step | Temperature | Heat |
|---|---|---|
| Warming or cooling | −20 °C → 0 °C | 41.8 kJ |
| Melting | 0 °C | 334 kJ |
| Warming or cooling | 0 °C → 100 °C | 419 kJ |
| Boiling | 100 °C | 2,256 kJ |
| Warming or cooling | 100 °C → 110 °C | 20.2 kJ |
- To change the temperature
- 481 kJ
- To melt or boil
- 2,590 kJ
- Time at 2,000 W
- 25 mins, 35 secs
The heat to warm, melt or boil water or another material, with the heating curve drawn live and the time a heater needs.
How to use
- Pick the material and enter its mass.
- Enter the start and end temperatures, or drag the ends of the heating curve.
- Read the heat needed, how much of it goes into melting or boiling, and how long a heater of your power takes.
How it works
Warming something takes heat in proportion to its mass, how much warmer it gets and its specific heat c, the energy that warms one kilogram by one degree: Q = m·c·ΔT. Water's specific heat is large, 4,186 J per kilogram per degree, which is why a pot of water takes so long to heat and cools so slowly; copper needs only 387 J.
At its melting and boiling points a substance takes in heat without getting warmer, because the energy goes into breaking the bonds between molecules: Q = m·L, with the latent heat L = 334 kJ/kg to melt ice and 2,256 kJ/kg to boil water. That is the flat step in the heating curve. Heating 1 kg of water from 20 °C to 100 °C takes 1 × 4,186 × 80 = 335 kJ, under 3 minutes in a 2 kW kettle; boiling it all away takes almost seven times more.
Values from OpenStax University Physics, volume 2, sections 1.4 and 1.5 (openstax.org). Specific heats change a little with temperature, only water passes through its phases here, and real heaters lose some heat to the air and the pot, so a real kettle takes a little longer.
Worked example
How much heat does it take to warm 1 kg of water from 20 °C to 100 °C?
- Q = m · c · ΔT, with c = 4,186 J/(kg·K) and ΔT = 100 − 20 = 80 K.
- Q = 1 × 4,186 × 80 = 334.9 kJ.
- A 2,000 W kettle with no losses needs 334.9 kJ ÷ 2,000 W, about 2.8 minutes.
334.9 kJ, about 2.8 minutes in a 2,000 W kettle.
Sources
- OpenStax University Physics, vol. 2, §1.4 Heat Transfer, Specific Heat, and CalorimetryUsed for: formula, reference data
- OpenStax University Physics, vol. 2, §1.5 Phase ChangesUsed for: reference data
Frequently asked questions
Does ending at 100 °C include turning the water into steam?
No. The tool treats water at exactly 100 °C as liquid; choose an end temperature above 100 °C to include full vaporization.
Can I start with ice at exactly 0 °C?
At exactly 0 °C the tool assumes liquid water. Start below 0 °C to include melting ice, or calculate the latent heat separately.
What does a negative heat result mean?
The material releases energy as it cools. The magnitude is the heat that must be removed.
Does a more powerful heater reduce the energy needed?
No. It reduces the ideal heating time; for the same material, mass and temperatures, the calculated energy stays the same.
Can this estimate melting metal or boiling ethanol?
No. Phase changes are included only for water; other materials use one specific heat throughout the entered range.
Next you might need
More in Physics
- Artificial gravity calculator, private, runs on your device
- Black hole time dilation, private, runs on your device
- Buoyancy calculator, private, runs on your device
- Circular motion calculator, private, runs on your device
- Colour mixing: light and paint, private, runs on your device
- Decibel calculator, private, runs on your device





