Skip to content

How loud is it here?

A decibel meter for your microphone: the live level, the lowest, average and highest, a one-minute graph and a classroom traffic light. Phone microphones are not calibrated, so it is an estimate.

Sound meter

Sound level

–

The microphone is off.

Red from 75 dB
The last minute of sound levels will appear here as a line.
Listen

Phone and laptop microphones are not calibrated and adjust themselves, so these decibels are an estimate, not a measurement. Do not use them for health, safety or legal purposes.

Calibration and limits
dB

dB

dB

Added to the digital level to estimate decibels. Raise or lower it until the meter agrees with a real sound level meter.

A decibel meter for your microphone: the live level, the lowest, average and highest, a one-minute graph and a classroom traffic light. Phone microphones are not calibrated, so it is an estimate.

The level now fills a large live screen with a Hold button, and the limits and statistics sit in tabs underneath.

How to use

  1. Press Start the meter and allow the microphone. Nothing is recorded; the level is measured and thrown away.
  2. Read the live level, the lowest, average and highest since you started, and the line of the last minute.
  3. For a classroom, turn on the traffic light: green is quiet, amber is getting loud and red is too loud. Change the limits in the Calibration and limits tab.
  4. To make the numbers closer to the truth, compare with a real sound level meter and adjust the calibration offset.

How loud is it? Typical sound levels

DecibelsAbout as loud as
30a whisper
40a quiet library
60a normal conversation
70a vacuum cleaner
85heavy city traffic
90a lawn mower
110a rock concert
120an ambulance siren

Typical values in dB(A) from NIOSH and CDC; real sounds vary.

How it works

Sound is a pressure wave, and its loudness is measured in decibels, a logarithmic scale: every 10 dB is about twice as loud to the ear, and 3 dB is twice the sound energy. Your microphone turns the wave into numbers up to a digital maximum, and the meter reports how far below that maximum the sound is (dBFS).

A microphone does not know how loud the room really is, because its sensitivity and the gain your phone applies are unknown. The meter therefore adds a calibration offset, 90 dB by default, to the digital level to estimate sound pressure level in dB. The level follows the 125 ms Fast time weighting of IEC 61672, and the average is the energy mean, 10·log10 of the mean of 10^(L/10), not a simple mean of decibels.

Treat the result as a guide: a few dB of error is likely, and a quiet room reads too high on most phones. Everyday comparisons, such as 60 dB for a conversation and 85 dB for heavy traffic, are typical values from NIOSH and CDC. Hearing damage becomes a risk with long exposure above about 85 dB(A); this page does not measure that. For work or legal needs use a calibrated meter.

Worked example

Your readings over a minute are 50 dB, 60 dB and 80 dB. What is the average?

  1. Convert each level to energy: 10^(50 ÷ 10), 10^(60 ÷ 10) and 10^(80 ÷ 10).
  2. Take the mean of the three energies and convert back: 10 × log10(mean) = 75.3 dB.

75.3 dB: more than the plain mean of 63.3 dB, because loud moments count for more.

Frequently asked questions

Is this decibel meter accurate?

Not like a calibrated sound level meter. Phone microphones differ and adjust themselves, so expect an error of several decibels. Calibrating against a real meter helps.

How do I calibrate it?

Measure the same steady sound with a real sound level meter, then change the calibration offset until both agree. The offset is kept in the link only if you share it.

What is a safe noise level for a classroom?

Speech is comfortable when background noise stays below about 35 dB(A) in a quiet room, and ordinary lessons reach 60 dB. The traffic light limits are yours to set; 60 and 75 dB are only defaults.

Does the app record my voice?

No. The microphone is read only to measure the level, on your device, and the sound is discarded at once.

Why does a quiet room show 40 dB or more?

The microphone's own noise and the default offset put a floor under the reading. Lower the offset, or calibrate, if the quiet reads too high.

What does the average mean?

It is the energy average of all readings since you started: loud moments count more than quiet ones, as they do for your ears.

More in Media, files & devices

All 35 utilities in Media, files & devices

Send feedback