Is your instrument in tune?
Play one note near your microphone to see the nearest note, cents sharp or flat and the frequency. Sound stays on your device.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Tuner
Note
Not listening
Press Start listening and allow the microphone, then play one steady note.
The standard is 440 Hz; some orchestras tune a little higher.
Play one note near your microphone to see the nearest note, cents sharp or flat and the frequency. Sound stays on your device.
The note and its needle now fill a large live screen; press Space to start or stop listening.
How to use
- Press Start listening and allow the microphone when the browser asks.
- Play one steady note on your instrument, close to the microphone.
- Read the note and the meter: left of the middle is flat, right is sharp. Tune until the needle sits in the middle and the card says In tune.
- Choose your instrument to see its open strings, and change the A4 reference if you tune to something other than 440 Hz.
How it works
Pitch is how fast a sound vibrates, counted in hertz. A string tuned to A4 vibrates 440 times a second, and every octave up doubles that. The tuner listens for the repeating shape of the sound, finds how long one repeat takes, and compares the resulting frequency with the nearest note.
The offset is shown in cents: 1200 × log₂(f / note), where f is the frequency you play and note is the frequency of the nearest note. One semitone is 100 cents, so +25 cents is a quarter of a semitone sharp. This tuner calls anything within 5 cents in tune.
A tuner works best with one note at a time. Chords, noise and several instruments confuse it, and a very quiet or very low sound may give no reading. Your microphone sound is analysed on your device and is never recorded, stored or sent anywhere.
Sources
- de Cheveigné and Kawahara: YIN, a fundamental frequency estimator for speech and music (JASA, 2002)Used for: formula
- ISO 16:1975: Acoustics, standard tuning frequency (standard musical pitch)Used for: constants
- Wikipedia: Bass guitarUsed for: reference data
- Wikipedia: Guitar tuningsUsed for: reference data
- Wikipedia: UkuleleUsed for: reference data
- Wikipedia: ViolinUsed for: reference data
Frequently asked questions
Is my microphone recorded or uploaded?
No. The sound is analysed live in your browser and discarded straight away. Nothing is saved or sent.
Why was the microphone blocked?
The browser asks only once. Open the site settings in your browser, allow the microphone for this page and press Start listening again.
What do sharp and flat mean?
Sharp means the note is higher than it should be, so loosen the string. Flat means it is lower, so tighten it.
What is a cent?
A cent is one hundredth of a semitone. Most people cannot hear a difference smaller than about 5 cents.
Why does the reading jump or disappear?
Background noise, other notes or a fading note make the pitch unclear. Play one clear note, a little louder, and let it ring.
Can it tune a chord?
No. Tune each string on its own, one note at a time.





