Skip to content

How loud are two sounds together?

Add decibels of several sources, see how sound fades with distance and convert ratios to decibels.

Sources
dB

dB

Combined level

63 dB

2 sources of 60 dB each make 63 dB together, not 120 dB: decibels add as sound powers, not as numbers.

Over the loudest
+3 dB
Power ratio
2×
Safe daily exposure (NIOSH)
Over 8 h (below 85 dB)

Add decibels of several sources, see how sound fades with distance and convert ratios to decibels.

How to use

  1. Choose what to calculate: add sources, the level at another distance, a ratio in decibels or decibels as a ratio.
  2. Enter the levels or values, or drag the end of a bar (or the point on the curve) in the drawing.
  3. Read the result and, for sound levels, the safe daily listening time next to familiar levels such as conversation and the 85 dB risk line.

How it works

Decibels measure ratios on a logarithmic scale, so they cannot simply be added. Two equally loud machines carry twice the sound power, and doubling a power adds only 3 dB: two 60 dB sources make 63 dB, ten make 70 dB. A sound 10 dB louder carries ten times the power and sounds roughly twice as loud.

For powers L = 10 × log₁₀(P ÷ P₀), for amplitudes such as sound pressure or voltage L = 20 × log₁₀(A ÷ A₀). Sources that are not in step add as powers: L = 10 × log₁₀(10^(L₁/10) + 10^(L₂/10) + …); for 60 and 60 dB that is 10 × log₁₀(2 × 10⁶) = 63.0 dB. In the open, a small source drops by 20 × log₁₀(r₂ ÷ r₁): 6 dB for every doubling of distance, 20 dB from 1 m to 10 m (OpenStax University Physics, volume 1, section 17.3).

The safe daily time follows the NIOSH recommended limit: 85 dB(A) for 8 hours, halved for every 3 dB above, so 100 dB is safe for only about 15 minutes. Levels here are taken as A-weighted; indoors walls reflect sound, so it fades more slowly with distance than in the open.

Worked example

How loud are two 60 dB sources together?

  1. Decibels add as powers, not as numbers: each source is 10^(60 ÷ 10) of power.
  2. L = 10 · log₁₀(10^(60/10) + 10^(60/10)) = 63.01 dB.

63.01 dB: doubling the sound power adds only 3.01 dB.

Frequently asked questions

Can this calculate cancellation between two speakers?

No. The source-summing mode assumes sounds whose phases are unrelated. Speakers playing the same tone can reinforce or cancel depending on their phase and the listening position.

Does a negative decibel value mean negative sound?

No. It means the measured quantity is below the reference level. In ratio mode, a negative value represents a ratio smaller than one.

Can I use the distance mode for a long line of traffic?

Not as a reliable prediction. It models a small point source in an open space; an extended road, barriers and reflections change how the level falls.

Can I convert a voltage ratio directly into a power ratio?

Only when the impedances are the same. The amplitude conversion assumes that power changes with the square of the amplitude; different impedances need a separate power calculation.

Can I add readings taken at different listening positions?

Measure each source at the same listening position before combining the levels. Readings taken at different distances describe different conditions and do not give the total at one place.

Send feedback