How much will this telescope show?
Magnification, field of view, exit pupil, limiting magnitude and resolution from the telescope and eyepiece.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Magnification
43.3 ×
The view covers 1.2° of sky and the exit pupil is 3 mm: a good magnification for this telescope.
- True field of view
- 2°
- Exit pupil
- 5 mm
- Focal ratio
- f/5
- Useful magnification range
- 18.6 – 260 ×
- Faintest star (magnitude)
- 13.3
- Resolution (Dawes limit)
- 0.892″
- Light gathering against the eye
- 345 ×
Magnification, field of view, exit pupil, limiting magnitude and resolution from the telescope and eyepiece.
How to use
- Enter the aperture and focal length of the telescope (both are in its specifications).
- Enter the focal length of the eyepiece and its apparent field of view (stated on the eyepiece, about 50° for a plain one).
- Read the magnification, the true field of view, the exit pupil and whether the magnification is sensible for this telescope.
A 130 mm f/5 telescope with different eyepieces (52° field)
| Eyepiece (mm) | Magnification | True field (°) | Exit pupil (mm) |
|---|---|---|---|
| 40 | 16 | 3.2 | 8 |
| 25 | 26 | 2 | 5 |
| 15 | 43 | 1.2 | 3 |
| 10 | 65 | 0.8 | 2 |
| 6 | 108 | 0.48 | 1.2 |
| 4 | 163 | 0.32 | 0.8 |
A shorter eyepiece magnifies more and narrows the field.
How it works
A telescope has two jobs: collect light and magnify. The aperture, the width of the main lens or mirror, decides how much light it collects and how fine a detail it can resolve; the magnification, which you change with the eyepiece, only makes the image bigger. A big image from a small telescope is just a blurry big image, which is why there is a useful maximum.
Magnification is the telescope's focal length divided by the eyepiece's: 650 mm / 25 mm = 26 ×. The true field of view is the eyepiece's apparent field divided by the magnification (52° / 26 = 2°, four full Moons wide), and the exit pupil, the width of the beam entering your eye, is aperture / magnification (130 / 26 = 5 mm). The useful range is from aperture / 7 mm (the widest pupil your eye can use) to twice the aperture in millimetres, 260 × here. The faintest star seen is about 2.7 + 5 × log₁₀(aperture in mm) magnitudes, and the Dawes limit 116 / aperture gives the closest double star it separates in arcseconds.
These are rules of thumb for a good telescope under a dark, steady sky. Poor optics, a bright city sky or turbulent air limit what you see, and the field of view formula is an approximation that is slightly off for very wide eyepieces. Sources: Wikipedia on Dawes' limit and limiting magnitude; standard amateur astronomy references.
Sources
- Wikipedia: Dawes' limitUsed for: formula
- Wikipedia: Limiting magnitudeUsed for: formula
Frequently asked questions
What is the best magnification for a telescope?
There is none. Use low power (exit pupil 2 to 5 mm) for star fields and nebulae, and high power (exit pupil 0.5 to 1 mm) for the Moon, planets and double stars, never above twice the aperture in millimetres.
Why can't I use 500 × with a small telescope?
A 70 mm telescope resolves details of about 1.7 arcseconds. Beyond about 140 × the image only gets bigger and blurrier, and the air usually limits it before that.
What is the exit pupil?
The disc of light leaving the eyepiece, equal to aperture divided by magnification. If it is wider than your pupil (about 7 mm in the dark, less with age), the extra light is lost.
What does the focal ratio mean?
Focal length divided by aperture, such as f/5. A low ratio gives a wide field and bright images at low power, and a high ratio is better for planets and demands longer eyepieces.
How accurate is the limiting magnitude?
It is a theoretical figure for a transparent, dark sky and good eyes. A bright sky can cost you two magnitudes or more, and with practice you may go a little deeper.





