How do sine and cosine come from the unit circle?
Sine, cosine and tangent of any angle, exact for special angles, on a live unit circle.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Key values as a table
| θ | rad | sin | cos | tan |
|---|---|---|---|---|
| 0° | 0 | 0 | 1 | 0 |
| 30° | π/6 | 1/2 | √3/2 | √3/3 |
| 45° | π/4 | √2/2 | √2/2 | 1 |
| 60° | π/3 | √3/2 | 1/2 | √3 |
| 90° | π/2 | 1 | 0 | undefined |
| 120° | 2π/3 | √3/2 | −1/2 | −√3 |
| 135° | 3π/4 | √2/2 | −√2/2 | −1 |
| 150° | 5π/6 | 1/2 | −√3/2 | −√3/3 |
| 180° | π | 0 | −1 | 0 |
| 270° | 3π/2 | −1 | 0 | undefined |
sin 60°
√3/2 ≈ 0.866025
At 60° the point on the unit circle is (0.5, 0.866025): cos is how far across it lies, sin how high.
- cos 60°
- 1/2 = 0.5
- tan 60°
- √3 ≈ 1.73205
- In radians
- π/3 ≈ 1.0472 rad
- Reference angle
- 60°
- Quadrant
- I
Sine, cosine and tangent of any angle, exact for special angles, on a live unit circle.
How to use
- Type an angle in degrees or radians, or drag the point round the circle.
- Read sin, cos and tan, with exact values such as √3/2 for every multiple of 15°.
- Watch the sine curve on the right: it is the height of the point, traced as the angle grows from 0. You can drag the point along the curve too.
How it works
Draw a circle of radius 1 around the origin and turn a radius by the angle θ, counter-clockwise from the positive x-axis. The point where it ends is (cos θ, sin θ): the cosine is how far across the point lies and the sine how high. The radius, the cosine and the sine form a right triangle, so cos²θ + sin²θ = 1 is just Pythagoras.
The tangent is the ratio tan θ = sin θ / cos θ, the slope of the radius, and it is the height where the radius, extended, meets the line x = 1. It does not exist at 90° and 270°, where cos θ = 0. At 60° the triangle is half an equilateral triangle, so cos 60° = 1/2, sin 60° = √3/2 ≈ 0.866025 and tan 60° = √3.
Going round the circle, the height rises and falls in the wave you see beside it: that is the sine curve, and every 360° (2π radians) it repeats. The signs follow the quadrant: cos is negative on the left half, sin on the lower half. Values that are not exact are rounded to six significant digits. Source: OpenStax Algebra and Trigonometry 2e, sections 7.3 and 7.4.
Worked example
What are the sine, cosine and tangent of 60°?
- 60° is π/3 radians, in the first quadrant, so all three are positive.
- The point on the unit circle is (cos, sin) = (1/2, √3/2) = (0.5, 0.866).
- tan = sin ÷ cos = √3 = 1.7321.
sin 60° = √3/2 = 0.866; cos 60° = 1/2 = 0.5; tan 60° = √3 = 1.7321.
Sources
- OpenStax Algebra and Trigonometry 2e, §7.3 Unit CircleUsed for: definitions
- OpenStax Algebra and Trigonometry 2e, §7.4 The Other Trigonometric FunctionsUsed for: definitions
- OpenStax Algebra and Trigonometry 2e, §9.2 Sum and Difference IdentitiesUsed for: formula
Frequently asked questions
How do I remember the special values?
For 0°, 30°, 45°, 60° and 90°, the sines are √0/2, √1/2, √2/2, √3/2 and √4/2. Read the same list backwards for the cosines.
What is a radian?
One radian subtends an arc equal to the circle’s radius. A full turn is 2π radians, so 180° equals π radians.
Can I enter negative angles?
Yes. A negative angle turns clockwise; its equivalent position within one turn is also shown.
Why do 60° and 420° give the same values?
They differ by one full turn and end at the same point. Sine and cosine repeat every 360°.
Can I enter an angle in radians instead of degrees?
Yes, select radians and enter the numerical angle. For example, π/2 is approximately 1.57079632679 radians.
Next you might need
More in Math & numbers
- Percentage calculator, private, runs on your device
- A/B test significance calculator, private, runs on your device
- Area of shapes, private, runs on your device
- Average calculator, private, runs on your device
- Chi-square test calculator, private, runs on your device
- Combinations and permutations calculator, private, runs on your device





