Skip to content

How do two waves add up?

Add two sine waves and watch the sum: constructive and destructive interference, and beats when the frequencies are close.

Hz

°

Hz

°

Key values as a table
WaveAmplitudeFrequencyPhase
Wave 114 Hz0°
Wave 20.85 Hz0°
Sum0.2–1.84.5 Hz—

Beat frequency

1 Hz

The sum swells to 1.8 and fades to 0.2 once every 1 s.

Time between beats
1 s
Pitch of the sum (mean frequency)
4.5 Hz
Formula

|f₁ − f₂| = |4 Hz − 5 Hz|

Add two sine waves and watch the sum: constructive and destructive interference, and beats when the frequencies are close.

How to use

  1. Set the amplitude, frequency and phase of the two waves, or drag the handles on them: the first crest slides the wave sideways (phase), and the third crest sets its frequency and height together.
  2. Give both waves the same frequency to see interference: in step they add up, half a cycle apart they cancel.
  3. Make the frequencies close, such as 4 and 5 Hz, to see beats: the sum swells and fades at the difference of the two.

How it works

When two waves meet, the result at each moment is simply the sum of the two: this is superposition. A wave here is y = A·sin(2πft + φ), with amplitude A (its height), frequency f in hertz (cycles per second) and phase φ (where in its cycle it starts).

With equal frequencies the sum is again one sine wave, of amplitude √(A₁² + A₂² + 2A₁A₂·cos Δφ), where Δφ is the phase difference. In step (Δφ = 0°) the amplitudes add, which is constructive interference; half a cycle apart (180°) they subtract, which is destructive interference, and equal waves cancel completely. Noise-cancelling headphones use exactly this.

With slightly different frequencies the waves drift in and out of step, so the sum swells and fades: beats, at the beat frequency f₁ − f₂. A 440 Hz and a 442 Hz tone beat twice a second, which is how musicians tune by ear. For example, 4 Hz and 5 Hz with amplitudes 1 and 0.8 beat once a second, between 0.2 and 1.8. Source: OpenStax University Physics, volume 1, sections 16.5 and 17.6.

Worked example

What happens when a 4 Hz wave and a 5 Hz wave add up?

  1. Beat frequency: |4 − 5| = 1 Hz, so the sound swells once every 1 s.
  2. The pitch is the mean frequency, 4.5 Hz.
  3. The peak swings between 1 + 0.8 = 1.8 and |1 − 0.8| = 0.2.

1 beat per second, with the amplitude between 0.2 and 1.8.

Frequently asked questions

Can I tell which note is sharp just from the beat frequency?

No. The beat frequency gives the size of the frequency difference, not its direction. Compare the two frequencies to see which is higher.

Will changing the starting phase change the beat rate?

No. For different frequencies, phase shifts when the loud and quiet parts occur. The beat rate still depends on the frequency difference.

Can this show standing waves along a string?

No. It shows the sum at one point over time. A standing-wave picture also needs position along the string and waves travelling in opposite directions.

What unit is the amplitude?

Any unit you like, such as pascals of sound pressure, volts or centimetres of water, as long as both waves use the same one.

Why does destructive interference sometimes leave a wave?

Destructive interference describes the opposing phases, even when the amplitudes differ. The larger wave is only partly cancelled, leaving the difference between the amplitudes.

Send feedback