How many volts is +4 dBu?
Convert dBu, dBV, volts and dBFS, with consumer -10 dBV and professional +4 dBu side by side.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Volts RMS
12.28 V
+24 dBu is +21.78 dBV and 12.28 V RMS; with 0 dBFS at +18 dBu it is +6 dBFS.
- dBV
- +1.78 dBV
- Volts peak
- 1.736 V
- Peak-to-peak
- 3.472 V
- dBFS
- −14 dBFS
Convert dBu, dBV, volts and dBFS, with consumer -10 dBV and professional +4 dBu side by side.
How to use
- Choose the unit you know (dBu, dBV, volts or dBFS) and enter the level.
- Read the same level in the other units; professional line level is +4 dBu and consumer line level is -10 dBV.
- Under More, set the analogue level of digital full scale if your converter is not aligned to +18 dBu.
Audio levels from -60 to +24 dBu
| dBu | dBV | Volts RMS | dBFS (at +18 dBu) |
|---|---|---|---|
| −60 | −62.22 | 0.000775 | −78 |
| −40 | −42.22 | 0.00775 | −58 |
| −20 | −22.22 | 0.0775 | −38 |
| −10 | −12.22 | 0.245 | −28 |
| 0 | −2.22 | 0.775 | −18 |
| 4 | 1.78 | 1.23 | −14 |
| 8 | 5.78 | 1.95 | −10 |
| 12 | 9.78 | 3.08 | −6 |
| 24 | 21.78 | 12.3 | 6 |
+4 dBu (professional) and -10 dBV (consumer, -7.8 dBu) differ by 11.8 dB.
How it works
Audio gear states levels as voltage relative to a reference, in decibels. Professional equipment uses dBu, relative to 0.775 V, and consumer equipment uses dBV, relative to exactly 1 V. That is why a pro mixer's "+4" and a hi-fi player's "-10" are not the same size: +4 dBu is 1.228 V and -10 dBV is 0.316 V, a difference of 11.8 dB.
The conversions are dBu = 20 × log₁₀(V / 0.7746 V) and dBV = 20 × log₁₀(V / 1 V), so dBu = dBV + 2.22. The 0.7746 V (√0.6) is the voltage that delivers 1 mW into 600 Ω. For a sine wave the peak is √2 times the RMS and the peak-to-peak twice that. Digital full scale, 0 dBFS, is a number in the converter, so it needs an alignment: +18 dBu in the EBU R68 practice, +20 dBu in SMPTE, which makes +4 dBu equal to -14 dBFS.
Real audio is not a sine wave, so peak and RMS voltages of music differ by the crest factor. Sources: Wikipedia on the decibel and EBU R68.
Sources
- EBU: R 68, Alignment level in digital audio production equipmentUsed for: constants
- Wikipedia: DecibelUsed for: formula
Frequently asked questions
What is the difference between dBu and dBV?
Only the reference: dBu is relative to 0.7746 V and dBV to 1 V, so a level in dBu is always 2.22 higher than the same level in dBV.
Why is professional level +4 dBu?
It is 1.228 V RMS, a convention from the days of 600 ohm lines and VU meters. Consumer gear uses a lower -10 dBV (0.316 V) to run on small power supplies.
What does 0 dBFS correspond to in volts?
It depends on the converter's calibration. With the common +18 dBu alignment, 0 dBFS is about 6.15 V RMS for a sine wave; many interfaces are rated by that maximum level.
Is dBu a power or a voltage unit?
It measures voltage; the 600 ohm only explains where the reference came from. The conversion works for any impedance.
Can I convert dBm to dBu?
Only for a stated impedance. In 600 ohms, 0 dBm is 0 dBu; for radio levels use the RF level converter.





