Skip to content

How long does sound echo in your room?

The reverberation time of a room from its size and surfaces, by Sabine or Eyring, judged against what the room is for.

More options

m²

Reverberation time RT60

1.33 s

Living room or listening room: the usual range is 0.3 to 0.6 s, so this room is too echoey.

Target range
0.3 – 0.6 s
Volume
50 m³
Absorption
6.1 m²
RT60 by Eyring
1.28 s
Absorption to add
7.4 m²

The reverberation time of a room from its size and surfaces, by Sabine or Eyring, judged against what the room is for.

How to use

  1. Enter the length, width and height of the room, then choose the material of the floor, ceiling and walls.
  2. Choose what the room is used for to see whether its reverberation time is in the usual range.
  3. Under More, add the absorption of furniture and people, switch to feet, or use the Eyring formula for a very absorbent room.

Absorption coefficients used (500 Hz)

MaterialAbsorption α
Concrete or brick (painted)0.06
Plaster or plasterboard0.05
Glass0.04
Wood0.10
Vinyl or tile0.03
Carpet on concrete0.14
Thick carpet on foam0.57
Heavy curtains0.55
Acoustic ceiling tiles0.70
Mineral wool panels0.90

Typical rounded values; real products differ.

How it works

When a sound stops in a room it does not stop at once: it keeps bouncing between the surfaces and fades. The reverberation time, RT60, is how long the sound takes to fade by 60 dB, to a millionth of its power. Hard bare rooms ring for seconds and muddy speech and music; soft furnished rooms sound dry. Each use has a comfortable range, from 0.2–0.4 s in a recording studio to about 2 s in a concert hall.

The Sabine formula is RT60 = 0.161 × V / A, where V is the volume in m³ and A the total absorption in m² (sabins), the sum of each surface's area times its absorption coefficient α. A 5 × 4 × 2.5 m room with a carpeted floor (α 0.14) and plaster ceiling and walls (α 0.05) has A = 20 × 0.14 + 20 × 0.05 + 45 × 0.05 = 6.05 m², so RT60 = 0.161 × 50 / 6.05 ≈ 1.3 s. The Eyring formula replaces A with −S × ln(1 − α average) and is more accurate when the surfaces are very absorbent.

The coefficients are typical rounded values at 500 Hz; real materials differ and absorb differently at low and high pitch, and the formulas assume the sound is spread evenly through the room. Furniture and people absorb too, which is why an empty room sounds worse. Sources: Everest and Pohlmann, Master Handbook of Acoustics; Wikipedia on reverberation.

Frequently asked questions

What reverberation time is good for a living room?

About 0.3 to 0.6 seconds at mid frequencies. Longer than that, speech loses clarity; much shorter and the room can feel lifeless.

How can I shorten the reverberation time?

Add absorption: heavy curtains, thick rugs, upholstered furniture and acoustic panels on the walls and ceiling. The tool shows how many square metres of absorption to add to reach the range.

What is a sabin?

One square metre of a perfectly absorbing surface, such as an open window. A room's total absorption in sabins is the sum of each surface's area times its absorption coefficient.

Sabine or Eyring, which should I use?

They agree for ordinary rooms. Eyring is more accurate when the average absorption is above about 0.2, as in a studio, where Sabine overestimates the time.

Does this work for an empty hall or a church?

Roughly, but large spaces with domes, balconies and audience seating need a more detailed model, and air itself absorbs high pitches in a big hall.

Send feedback