Skip to content

How many volts is +4 dBu?

Convert dBu, dBV, volts and dBFS, with consumer -10 dBV and professional +4 dBu side by side.

dBu

dBu

Volts RMS

1.946 V

+8 dBu is +5.78 dBV and 1.946 V RMS; with 0 dBFS at +18 dBu it is −10 dBFS.

dBV
+1.78 dBV
Volts peak
1.736 V
Peak-to-peak
3.472 V
dBFS
−14 dBFS

Convert dBu, dBV, volts and dBFS, with consumer -10 dBV and professional +4 dBu side by side.

How to use

  1. Choose the unit you know (dBu, dBV, volts or dBFS) and enter the level.
  2. Read the same level in the other units; professional line level is +4 dBu and consumer line level is -10 dBV.
  3. Under More, set the analogue level of digital full scale if your converter is not aligned to +18 dBu.

Audio levels from -60 to +24 dBu

dBudBVVolts RMSdBFS (at +18 dBu)
−60−62.220.000775−78
−40−42.220.00775−58
−20−22.220.0775−38
−10−12.220.245−28
0−2.220.775−18
41.781.23−14
85.781.95−10
129.783.08−6
2421.7812.36

+4 dBu (professional) and -10 dBV (consumer, -7.8 dBu) differ by 11.8 dB.

How it works

Audio gear states levels as voltage relative to a reference, in decibels. Professional equipment uses dBu, relative to 0.775 V, and consumer equipment uses dBV, relative to exactly 1 V. That is why a pro mixer's "+4" and a hi-fi player's "-10" are not the same size: +4 dBu is 1.228 V and -10 dBV is 0.316 V, a difference of 11.8 dB.

The conversions are dBu = 20 × log₁₀(V / 0.7746 V) and dBV = 20 × log₁₀(V / 1 V), so dBu = dBV + 2.22. The 0.7746 V (√0.6) is the voltage that delivers 1 mW into 600 Ω. For a sine wave the peak is √2 times the RMS and the peak-to-peak twice that. Digital full scale, 0 dBFS, is a number in the converter, so it needs an alignment: +18 dBu in the EBU R68 practice, +20 dBu in SMPTE, which makes +4 dBu equal to -14 dBFS.

Real audio is not a sine wave, so peak and RMS voltages of music differ by the crest factor. Sources: Wikipedia on the decibel and EBU R68.

Frequently asked questions

What is the difference between dBu and dBV?

Only the reference: dBu is relative to 0.7746 V and dBV to 1 V, so a level in dBu is always 2.22 higher than the same level in dBV.

Why is professional level +4 dBu?

It is 1.228 V RMS, a convention from the days of 600 ohm lines and VU meters. Consumer gear uses a lower -10 dBV (0.316 V) to run on small power supplies.

What does 0 dBFS correspond to in volts?

It depends on the converter's calibration. With the common +18 dBu alignment, 0 dBFS is about 6.15 V RMS for a sine wave; many interfaces are rated by that maximum level.

Is dBu a power or a voltage unit?

It measures voltage; the 600 ohm only explains where the reference came from. The conversion works for any impedance.

Can I convert dBm to dBu?

Only for a stated impedance. In 600 ohms, 0 dBm is 0 dBu; for radio levels use the RF level converter.

Send feedback