How far will I travel before stopping?
Separate reaction distance from an idealized braking distance.
What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Total stopping distance, about
28 m
About 6 car lengths on a level road with constant friction; real roads differ.
- Share of the distance spent reacting
- 50%
- Braking time
- 2 s
- Reaction distance14 m
- Braking distance14 m
Formula
d = v × t + v² / (2 × μ × g₀)
Separate reaction distance from an idealized braking distance.
How to use
- Enter the speed at which braking is needed.
- Set your assumed reaction time and choose a surface example or custom friction.
- Read reaction and braking distances separately before comparing the total.
Stopping distance by speed, dry and wet
| Speed (km/h) | Reaction distance (m) | Dry road | Wet road |
|---|---|---|---|
| 30 | 8 | 13 m | 15 m |
| 50 | 14 | 28 m | 34 m |
| 60 | 17 | 37 m | 45 m |
| 80 | 22 | 58 m | 73 m |
| 100 | 28 | 84 m | 106 m |
| 120 | 33 | 114 m | 147 m |
One second of reaction time, level ground, μ = 0.7 dry and 0.5 wet. A real car with worn tires, a slope or ice needs more.
How it works
Reaction distance is vt. With constant friction on level ground, deceleration is μg₀ and braking distance is v²/(2μg₀). Speed v is in m/s and reaction time t is in seconds.
The two parts grow differently. Reaction distance grows in step with speed, but braking distance grows with the square of speed, so at 30 km/h most of the stop happens before the brakes bite, and at motorway speeds most of it happens after.
This model assumes level ground and constant sliding friction. Dry and wet concrete are textbook examples, not measured tire performance or ABS predictions. It excludes slope, brake build-up, tire condition and changing grip.
Worked example
How far does a car travel before it stops from 50 km/h on a dry road?
- Speed in metres per second: 50 km/h ÷ 3.6 = 13.9 m/s.
- Reaction distance in 1 s: 13.9 × 1 = 13.9 m.
- Braking distance with μ = 0.7: 13.9² ÷ (2 × 0.7 × 9.80665) = 14.1 m.
The total stopping distance is 28 m.
Sources
- BIPM: Resolution 2 of the 3rd CGPM (1901), standard acceleration of gravityUsed for: constants
- GOV.UK: The Highway Code, rule 126 (stopping distances)
- OpenStax College Physics 2e, §5.1 FrictionUsed for: constants
- OpenStax University Physics, vol. 1, §3.4 Motion with Constant AccelerationUsed for: formula
Frequently asked questions
Why does doubling speed matter?
Reaction distance doubles, while the constant-friction braking distance becomes four times as large.
How much longer is the stop on a wet road?
With these examples the braking part is 1.4 times as long (0.7 ÷ 0.5), while the reaction part stays the same. From 100 km/h the total grows from about 84 m to about 106 m.
What is the most common mistake when estimating stopping distance?
Forgetting the reaction distance. At 100 km/h a car covers about 28 m every second before the driver even touches the brake, and a tired or distracted driver who reacts in 1.5 s adds about 14 m more.
Is a two-second gap enough to stop?
It is the minimum gap the UK Highway Code advises on fast roads, not a stopping distance: it gives you time to react while the car ahead brakes too. The Highway Code says to at least double it on wet roads and allow up to ten times more on icy roads.
Are the surface values measured for my car?
No. They are textbook rubber-on-concrete kinetic friction examples, not vehicle-specific stopping tests.
Does this predict ABS performance?
No. The simple friction model does not simulate tire slip control or brake systems.
Can I model snow or ice?
Use Custom friction only when you have a coefficient relevant to your conditions; no snow or ice value is assumed here. As an illustration, μ = 0.1 turns a 28 m stop from 50 km/h into about 112 m.
Where does the reaction time come from?
You choose it. The one-second default is an illustrative input, not a guaranteed human response time.





