What you enter stays on your device while you use this tool. Opening a shared link sends the settings in its address to HowToolbox to prepare the page.
Equivalent shutter time
1/500 s
Matches 1/125 s at f/8 and ISO 100, shot at f/4 and ISO 100.
- Calculated shutter time (before camera rounding)
- 1/500 s
- Exposure value at ISO 100
- 13
- Shutter-time change in stops
- −2 stops
Formula
EV100 = log₂(N²/t) − log₂(ISO/100); t₂ = t₁ × (N₂/N₁)² × ISO₁/ISO₂.
Find an equivalent shutter time and compare aperture and ISO changes in stops.
How to use
- Enter the aperture, the shutter time (pick a standard speed or type your own) and the ISO of the shot you like.
- Enter the new aperture and ISO you want to use.
- Read the shutter time that keeps the exposure the same, and by how many stops it changed. Copy the link to keep this scenario.
How it works
At constant scene brightness, opening the aperture lets in more light per second, so a shorter shutter time can preserve the same image brightness. Raising ISO also allows a shorter shutter time, although it does not increase the light reaching the sensor.
For f-number N and shutter time t in seconds, EV = log₂(N²/t). EV100 subtracts log₂(ISO/100) to put settings on an ISO-100 reference. Equivalent time is t₂ = t₁ × (N₂/N₁)² × ISO₁/ISO₂. A change from f/8 at 1/125 s to f/4 at the same ISO gives 1/500 s.
A positive shutter-time change means a longer exposure; a negative change means a shorter one. One stop doubles or halves time. Aperture stops are 2 × log₂(N₂/N₁), because admitted light varies with the inverse square of the f-number.
The calculation assumes constant light and ideal reciprocity between aperture and time. It does not correct film reciprocity failure, lens transmission, filters, flash, noise or camera setting limits. It finds equivalent settings; it cannot determine correct exposure without a starting measurement.
Worked example
What shutter time matches f/8 at 1/125 second when changed to f/4?
- Keep ISO at 100. The f-number falls by half, admitting four times as much light per second.
- Divide 1/125 second by four to obtain 1/500 second.
1/500 s
Frequently asked questions
Should I enter 125 for a 1/125-second exposure?
No. Enter 0.008 seconds. The field uses elapsed seconds, not a shutter-speed denominator.
Does EV100 measure the scene directly?
No. It is derived from your entered settings. They must already represent the scene as you intend.
What does a negative stop change mean?
The equivalent shutter time is shorter. A change of −2 stops divides the starting time by four.
Is long-exposure film reciprocity failure included?
No. Use your film manufacturer’s correction separately for long exposures.
What does one stop mean?
One stop is a doubling or halving of the light: a shutter time twice as long, or an f-number about 1.4 times smaller. Doubling ISO is also one stop.





