Skip to content

How tall is that tree or building?

Aim the top edge of your phone at the top, step back a measured distance and read the height. Sensor readings stay on your device.

Clinometer

Height

18.4 m

Press Start aiming, allow motion access and sight along the phone’s top edge at the top.

Sketch: an object 18.4 m tall seen at 40° from your eye
Height 18.4 m
Above your eye: 16.8 m · Your eye height: 1.6 m · Line of sight to the top: 26.1 m
Aim and distance
m

°

Aim the top edge of your phone at the top, step back a measured distance and read the height. Sensor readings stay on your device.

Aim on a large live screen: hold the angle you aim at and put it into the height with one press.

How to use

  1. Stand on level ground and measure the distance to the foot of the tree or wall: pace it out or use a tape.
  2. Press Start aiming and allow motion access if asked. Hold the phone upright and sight along its top edge at the top of the object.
  3. When the angle is steady, press the button to use it. On a computer, or without sensors, type an angle you measured.
  4. Open More options to set your eye height and metres or feet. The height appears at once.

How it works

The tree, the ground and your line of sight to the top form a right triangle. You know the horizontal side (your distance) and the angle at your eye, so the vertical side follows from the tangent: above-eye height = distance × tan(angle). Add the height of your eye above the ground and you have the height of the object.

The steeper the angle, the more a small error in it matters, so stand back until the angle to the top is about 30 to 45 degrees. Measure your distance along level ground, and remember that the height of your eye is part of the answer.

Phone sensors are good to about half a degree; ground that slopes, a leaning tree or a top you cannot see clearly all add error. Treat the answer as an estimate to the nearest few percent, not a survey.

Worked example

You stand 20 m from a tree, your eye is 1.6 m above the ground and its top is 40° up. How tall is it?

  1. Part above your eye: 20 × tan(40°) = 16.8 m.
  2. Add your eye height: 16.8 + 1.6 = 18.4 m.

The tree is about 18.4 m tall.

Method

No outside data is used: the result is worked out directly from the formula h = d × tan θ + e, explained under How it works.

Sources and methods

Frequently asked questions

Is my motion data stored or sent?

No. The sensor reading is used on your device to show the angle and is never stored, logged or put in the address.

How far from the tree should I stand?

Far enough that the angle to the top is between about 30 and 45 degrees. That is roughly a distance equal to the height of the tree.

Do I need the sensor?

No. You can type any angle, for example one read from an app or a protractor with a plumb line, and the height is calculated the same way.

What if the ground is sloping?

The formula assumes level ground. On a slope, measure the angle to the base of the tree as well and use the difference, or find level ground.

Why does it say the top would be at or below the ground?

The angle you entered is negative or too small for your eye height. Aim up at the top and check that the angle is positive.

What is my eye height?

The height from the ground to your eye when standing, about 1.6 metres or 5 feet 3 inches for many adults. Measure it against a wall if you want to be exact.

Send feedback