Skip to content

How fast does your engine's piston move?

Mean piston speed from stroke and rpm, in m/s and feet per minute, or the rpm that reaches a target speed.

Find

rpm

Mean piston speed

14.3 m/s

A stroke of 86 mm at 5,000 rpm gives a mean piston speed of 14.3 m/s (2,822 ft/min).

In feet per minute
3,668 ft/min
Typical for
sports and high-revving engines (16 to 20 m/s)

Mean piston speed from stroke and rpm, in m/s and feet per minute, or the rpm that reaches a target speed.

How to use

  1. Enter the stroke of your engine and the engine speed in rpm, for example the redline.
  2. Read the mean piston speed in metres per second and feet per minute, and the kind of engine that runs at that speed.
  3. To find the highest safe revs instead, choose Engine speed under Find and enter the piston speed you want to stay under.

Mean piston speed (m/s) for common strokes and engine speeds

Mean piston speed = 2 × stroke × rpm ÷ 60.

How it works

In every turn of the crankshaft each piston goes down and up once, so it travels twice the stroke. Piston speed is how fast that is on average. It is not constant: the piston stops at the top and bottom of every stroke and reaches a speed about 1.6 times higher than the average in between. The mean is still the number engine builders use, because it sets the stresses on the piston, rings, connecting rod and bearings.

The mean piston speed is S = 2 × L × N ÷ 60, where L is the stroke in metres and N the crankshaft speed in revolutions per minute (Heywood, Internal Combustion Engine Fundamentals, eq. 2.6). For a stroke of 86 mm at 6 500 rpm, S = 2 × 0.086 × 6 500 ÷ 60 = 18.6 m/s, which is 3 668 feet per minute. Solved the other way, N = 60 × S ÷ (2 × L) gives the rpm for a target speed.

As a rule of thumb, road engines stay under about 16 m/s at the redline, sports engines reach 20 m/s, and racing engines run 20 to 25 m/s or more with special materials. The bands are guidelines, not limits: the real ceiling depends on the design, the materials and the lubrication. Engines with a short stroke can safely turn faster, which is why oversquare engines rev higher.

Method

No outside data is used: the result is worked out directly from the formula S = 2 × L × N / 60, explained under How it works.

Sources and methods

Frequently asked questions

What is mean piston speed?

It is the average speed of the piston over one revolution: twice the stroke times the revolutions per second. It tells how hard the engine is working mechanically.

What piston speed is too high?

For a production engine, going much above 20 m/s (about 4,000 feet per minute) at the redline is rare. Race engines go beyond 25 m/s, but they use special pistons, rods and frequent rebuilds.

Why do short-stroke engines rev higher?

For the same rpm a shorter stroke means a lower piston speed, so less stress and wear. That is why high-revving engines usually have a bore larger than the stroke.

Is the piston speed the same at every moment?

No. The piston stops twice per revolution and its fastest moment, around the middle of the stroke, is about 1.6 times the mean. This calculator gives the mean.

How do I find the maximum rpm for a given stroke?

Choose Engine speed under Find and enter the mean piston speed you consider safe for your engine. For an 86 mm stroke and 20 m/s, that is about 6 977 rpm.

Send feedback